4.9/ 5.0
95% pembeli merasa puas
23 rating • 3 ulasan
5(21)91.3%
4(1)4.35%
3(1)4.35%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp38.000
Driver Motor Stepper DRV8825 DRV 8825 Stepstick 3D Printer Arduino
Rp38.000
Pilih model: 1 model
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Microcontroller
Deskripsi Modul Mesin Driver Stepper Dvr8825 u Printer 3D Stepper
1. Maximum 2.5A Current;
2. Highest Support 32 Segments;
3. 4 Layers Pcb Board, Better Heat Dissipation Performance;
4. Smaller Chip Internal Resistance, Lower Heating, Better Heat Dissipation;
Applicable Occasions:
Occasion That Drive Stepper Motors Are Needed;
Must Modules To Build 3D Printers, Cnc, Engraving Machine, Etc.;
Supported 3D Printers: Prusa, Mendel, Ultimaker, Printbot, Makerbot, And So On.
You Can Refer To The Following Arduino Code To Directly Drive The Motor;
Features:
1. Suitable For Driving 8.2V~45V 2.5A Stepper Motors;
2. Only Simple Step And Direction Control Interface;
3. Six Different Step Patterns: All, Half, 1/4, 1/8, 1/16, 1/32;
4. Adjustable Potentiometer Can Adjust The Maximum Current Output, So As To Achieve Higher Step Rate;
5. Automatic Current Attenuation Mode Detection / Selection;
6. Overheating Shutdown Circuit, Undervoltage Lockout, Cross Current Protection;
7. Earthing Short Circuit Protection And Loading Short Circuit Protection
Specifications:
Product Name: Stepper Motor Driver Module Drv8825 For 3D Printer Reprap 4 Ramps1.4 Stepstick
Size: 15 X 20Mm/0.59 X 0.79"
Driving Current: 2.5A
Segments: 1, 1/2, 1/4, 1/8, 1/16, 1/32
Manufacturing Process: Smt Machine Manufacturing, Non Manual Welding, Good Quality, Higher Performance, More Stable
Included:
1 X Stepper Motor Driver Module Drv8825
1. Maximum 2.5A Current;
2. Highest Support 32 Segments;
3. 4 Layers Pcb Board, Better Heat Dissipation Performance;
4. Smaller Chip Internal Resistance, Lower Heating, Better Heat Dissipation;
Applicable Occasions:
Occasion That Drive Stepper Motors Are Needed;
Must Modules To Build 3D Printers, Cnc, Engraving Machine, Etc.;
Supported 3D Printers: Prusa, Mendel, Ultimaker, Printbot, Makerbot, And So On.
You Can Refer To The Following Arduino Code To Directly Drive The Motor;
Features:
1. Suitable For Driving 8.2V~45V 2.5A Stepper Motors;
2. Only Simple Step And Direction Control Interface;
3. Six Different Step Patterns: All, Half, 1/4, 1/8, 1/16, 1/32;
4. Adjustable Potentiometer Can Adjust The Maximum Current Output, So As To Achieve Higher Step Rate;
5. Automatic Current Attenuation Mode Detection / Selection;
6. Overheating Shutdown Circuit, Undervoltage Lockout, Cross Current Protection;
7. Earthing Short Circuit Protection And Loading Short Circuit Protection
Specifications:
Product Name: Stepper Motor Driver Module Drv8825 For 3D Printer Reprap 4 Ramps1.4 Stepstick
Size: 15 X 20Mm/0.59 X 0.79"
Driving Current: 2.5A
Segments: 1, 1/2, 1/4, 1/8, 1/16, 1/32
Manufacturing Process: Smt Machine Manufacturing, Non Manual Welding, Good Quality, Higher Performance, More Stable
Included:
1 X Stepper Motor Driver Module Drv8825
Ada masalah dengan produk ini?