Remote RF 2Ch Linear Motor 12V DC 433MHz 2Way Motor DC Forward Reverse

Remote Control RF 2Ch 12V DC 433MHz 10A 2-Way Motor DC Forward Reverse

This product is widely used in remote water pump switches, remote control machine switches, wireless remote control sockets, remote control lamps, various small appliances control, access control, curtains & so on.

Specification
Working voltage:DC12V DC
Quiescent current:10mA
Quiescent current: 8mA
Single working current 40 mA
Two working currents (self-locking) 80 mA
Operating frequency:433MHz
Frequency deviation: 0.2MHZ
Relay Out: 10A
receiving sensitivity -105dB (optional higher sensitivity module)
working mode: jog, self-locking, interlocking

Modulation method: ASK (anti-interference, strong transmission performance)
code mode:intelligent learning type 1527 learning code
output type:4-way relay switch signal
working environment:-15^75 degrees Celsius
Coding mode: learning code

Instructions:
1. Jog function:press the control board code button once, the LED indicator flashes once,& when the LED indicator lights up,press the remote control button that needs to be coded, & the control panel LED indicator flashes 3 times continuously,Its Successful.
2. Self-locking function:press the control board code button twice in succession,the LED indicator flashes 2times& when the LED indicator lights up,press the remote control button that needs to be coded& the control panel LED indicator flashes 3times continuously
3. Interlock function:press the control board code button 3times in succession,the LED indicator flashes 3 times,wait for the remote control button of the code to be pressed after the LED indicator lights up,the control panel LED indicator flashes 3times continuously
4. Clear code function:press the control board code button 8 times in succession,the LED indicator flashes 8 times,at this time,the LED indicator will automatically flash 8 times continuously.