4.9/ 5.0
95% pembeli merasa puas
20 rating • 11 ulasan
5(18)90%
4(1)5%
3(1)5%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 116
Min. pembelian 6 pcs
Subtotal
Rp8.700
Terminal Wago Push Connector 2 Pin Konektor Kabel Model Tusuk 773-102
Rp1.450
- Kondisi: Baru
- Min. Pemesanan: 6 Buah
- Etalase: Terminal Wago / Block
773-102 Push Wire Connector For Junction Box
1.DESCRIPTION
Simply pushing the stripped conductor into the connector makes the connection. The transparent housing provides a visible indication that the conductor is secure. There is also a test point in the base of the housing which can be accessed using a standard test probe. The cables are removed by holding the wire and twisting left/right while pulling on the connector, which means the connector can be re-used. This new series, with its compact design, uses 30 % less Space than other Series. The transparent housing also enables the electrician or installer to see at a glance Whether all the conductors have been fully inserted and properly connected.
Design with the operating Push-in for easily handling.
2 conductor terminal block.
There is a test point in the base of the housing
Max continuous service temperature 60C.
Technical Parameters
Model No. :VSE-102-A (773-102)
Color: Yellow, other color can be customized
Length/Height/Wide (mm): 19.5/13.1/9.2
Connection method: Cage Clamp
Material: Flame resistant Nylon PA66, also available in PC material
Rated Voltage/Current: 400V/24A
Cross section, solid Cable/Conductor Size: 0.75-2.5 mm /18-12 AWG
Cross section, soft Cable/Conductor Size: 1.5-2.5mm /16-12 AWG
Strip length: 12 mm / 0.47in
Mounting Carrier: 773-332
Standard: IEC 60947-7-1
Certification: CE/RoHS/CQC/ISO 9001
1.DESCRIPTION
Simply pushing the stripped conductor into the connector makes the connection. The transparent housing provides a visible indication that the conductor is secure. There is also a test point in the base of the housing which can be accessed using a standard test probe. The cables are removed by holding the wire and twisting left/right while pulling on the connector, which means the connector can be re-used. This new series, with its compact design, uses 30 % less Space than other Series. The transparent housing also enables the electrician or installer to see at a glance Whether all the conductors have been fully inserted and properly connected.
Design with the operating Push-in for easily handling.
2 conductor terminal block.
There is a test point in the base of the housing
Max continuous service temperature 60C.
Technical Parameters
Model No. :VSE-102-A (773-102)
Color: Yellow, other color can be customized
Length/Height/Wide (mm): 19.5/13.1/9.2
Connection method: Cage Clamp
Material: Flame resistant Nylon PA66, also available in PC material
Rated Voltage/Current: 400V/24A
Cross section, solid Cable/Conductor Size: 0.75-2.5 mm /18-12 AWG
Cross section, soft Cable/Conductor Size: 1.5-2.5mm /16-12 AWG
Strip length: 12 mm / 0.47in
Mounting Carrier: 773-332
Standard: IEC 60947-7-1
Certification: CE/RoHS/CQC/ISO 9001
Ada masalah dengan produk ini?