DS-3E1526P-EI/M HIKVISION 24-Port Gigabit Smart PoE Switch Total PoE power budget 230 W

READY STOK
GARANSI 2 TAHUN

DS-3E1526P-EI/M
24-Port Gigabit Smart PoE Switch
Smart managed switches are developed by Hikvision, featuring easy management and maintenance. You can easily deploy,
monitor, and expand your video security system anytime and anywhere with our software platforms. You can view the
network topology, monitor the health of the network, and receive device alarms in real time, which greatly reduces the cost
of network operation and maintenance.
+ 24 x gigabit PoE RJ45 ports, 1 × gigabit RJ45 port, 1 x gigabit fiber optical port
+ Total PoE power budget 230 W
+ Unified cloud management for security systems
+ Network topology at your fingertips
+ Remote troubleshooting
+ Visualized topology management
+ Up to 300 m long-range PoE transmission
+ 6 kV surge protection


General
Shell Metal material
Net Weight 2.96 kg (6.52 lb)
Gross Weight 3.2 kg (7.05 lb)
Dimensions (W × H × D) 440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'')
Operating Temperature 0 °C to 45 °C (0 °F to 113 °F)
Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity 5% to 95% (no condensation)
Relative Humidity 5% to 95% (no condensation)
Power Supply 100~240 V AC, 50/60 Hz, Max. 4 A
Installation Mode Rack (equipped with mounting ears)
Max. Power Consumption 250 W
Power Consumption in Idle 30 W
Surge Protection 6 kV
Network Parameters
Ports 24 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
MAC Address Table 8 K
Switching Capacity 56 Gbps
Packet Forwarding Rate 41.66 Mpps
Internal Cache 4.1 Mbits
PoE Power Supply
PoE Standard IEEE 802.3af,IEEE 802.3at
PoE Power Pin 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port PoE: Ports 1 to 24
Max. Port Power 30 W
PoE Power Budget 230 W
Software Function
Long Range Ports 1 to 24: up to 300 m.
Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 24: port isolation mode to improve network security.
Ports in an isolation group cannot communicate with each other, but they can
communicate with ports outside the isolation group.
PoE Watchdog Ports 1 to 24: auto detect and restart the cameras that do not respond.
Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for
load balancing, bandwidth expansion, and port protection.
Support static link aggregation.
Support 8 aggregation groups.
Loop Prevention
Loop prevention is used to prevent the switching network from forming loops, which
will seriously affect network communication. Disabled by default.
Support 802.1D STP.
Suppport 802.1w RSTP.