HIGH PRESSURE HYDRAULIC GEAR PUMP HONOR 52CC / GEAR PUPM HONOR

HIGH PRESSURE HYDRAULIC GEAR PUMP HONOR GROUP SIZE 50CC
===================================================
MATERIAL
Material Body : Die Cast Aluminium
Mounting Flange : Cast Iron
Continuous Pressure : 250 bar
Max. Pressure : 270 bar
Speed Range : 3000 rpm
===================================================
SPECIFICATION
Mounting Flange :
* Code A (SAE "A" 2-Bolts 106.4mm, Pilot Diameter 82.55mm)
* Code B (SAE "B" 2-Bolts 146mm, Pilot Diameter 101.6mm)
* Code C (European 4-Bolts 98.5mm x 128mm, Pilot Diameter 50.8mm)
* Code E (German 4-Bolts 102mm x 145mm, Pilot Diameter 105mm)
===================================================
Drive Shaft Mounting Code A:
* Code 1 (Straight Keyed 15.875mm, Flat Key 18mm x 4mm)
* Code 2 (9 teeth D/P 16/32, Diameter 15.875mm)
* Code 4 (Straight Keyed 19.05mm, Flat Key 28.575mm x 4.762mm)
* Code 5 (Splined 11teeth D/P 16/32, Diameter 19mm)
Drive Shaft Mounting Code B:
* Code 6 (Straight Keyed 22.22mm, Flat Key 25.4mm x 6.35mm)
* Code 7 (Straight Keyed 25.4mm, Flat Key 31.75mm x 6.35mm)
* Code 8 (Splined 13teeth D/P 16/32, Diameter 21.8mm)
* Code 9 (Splined 15teeth D/P 16/32, Diameter 25mm)
Drive Shaft Mounting Code C:
* Code T1 (Tapered 1:8 , Thread M14X1.5P)
Drive Shaft Mounting Flange E:
* Code T2 (Tapered 1:5 , Thread M16X1.5P)
===================================================
Port :
* Code B3 (BSPF)
* Code F3 (Square Flange)
* Code F4 (Rectangle Flange)
* Code ZB3 (Rear Port)
===================================================
Displacement :
* Code 18 (18cc/rev)
* Code 20 (20cc/rev)
* Code 23 (23cc/rev)
* Code 25 (23.5cc/rev)
* Code 28 (28cc/rev)
* Code 33 (33cc/rev)
* Code 38 (38cc/rev)
* Code 44 (44cc/rev)
* Code 52 (52cc/rev)
* Code 60 (60cc/rev)
* Code 70 (70cc/rev)
* Code 80 (80cc/rev)
* Code 90 (90cc/rev)
===================================================
Rotation :
* Code L (CCW)
* Code R (CW)
===================================================
Manufacture HONOR GEAR PUMP CORP. TAIWAN