Solenoid valve BURKERT 5281 A 13,0 NBR MS PORT 1/2"inch 220vac

Solenoid valve BURKERT type 5281 A 13,0 NBR MS PORT 1/2" 220vac 16bar
is a 2/2-way normally
closed solenoid valve with a spring coupled
diaphragm system. It is universally used for
liquids. A minimum differential pressure of 0.5
bar is required for full opening.
High Performance Version (HP00)
Preferred for gas, air and vacuum applications
with reinforced springs for top level closing
and sealing power. The valve opens and closes
without differential pressure.

Orifi
ce
Standard DN 10 - 40 mm
HP00: DN13-20
Body material
Brass acc. to DIN EN 50930-6, stainless steel 1.4408 (316),
nickel-plated brass (5μm)
Inner part of valve
Brass body
Stainless steel body
Brass, stainless steel and PPS
Stainless steel and PPS
Seal material
NBR, FKM, EPDM (HP00 - NBR on request)
Medium
NBR
FKM
EPDM
Neutral fl uids, water, hydraulic oil, oil without additives
Per-solutions, hot oils with additives
Oil and fat-free fl uids and gases
Ambient temperature
Max. +55 °C
Medium temperature
NBR
FKM
EPDM
-10 to +80 °C
0 to +90 °C with polyamide coil / 0 - 120 ºC with epoxy coil
-30 to +90 °C with polyamide coil
-30 to +100 °C with epoxy coil
Voltages
Standard 024/DC, 024/50, 230/50, 110/50, 120/60
HP00: 24V (50-60Hz), 230V (50-60Hz)
Voltage tolerance
±10%
Duty cycle
100% continuous rating
Electrical connection
Tag connector acc. to DIN EN 175301-803 Form A
(previously DIN 43650) for cable plug Type 2508
(see ordering chart for accessories, page 7)
Protection class
IP 65 with cable plug
Installation
As required, preferably with actuator uprigh