JY213L High Speed Gate Driver For Power MOSFET And IGBT Devices

The JY213L is a high-speed 3-phase gate driver for power MOSFET and IGBT devices with three independent high and low side referenced output channels. Built-in dead time protection and shoot-through protection prevent damage to the half-bridge. The UVLO circuits prevent malfunction when VCC and VBS are lower than the specified threshold voltage. A novel high-voltage BCD process and common-mode noise canceling technique provide stable operation of high-side drivers under high dV/dt noise conditions while achieving excellent negative transient voltage tolerance. An enable pin (EN) is included so that standby mode may be used to set the chip into a low quiescent current state to realize long battery lifetime. APPLICATION • E-BIKE/electric power tool 3-phase motor driver • Battery-powered mini/micro motor control • General purpose inverter FEATURES • Integrated 90V half-bridge high side driver • Ability to drive up to 3-phase half-bridge gates • Built-in boot strap diode for each high side channel • Built-in dead time protection • Shoot-through protection • Under voltage lockout for VCC and VBS • Low operation voltage 0–5.5V for VCC and VBS • 3.3V and 5V input logic compatible • Enable pin (EN) for low standby current • IO+/IO-: +1.2A/–2.0A at VCC=15V, VBS=15V • Built-in dead time：0.5us (typ.) • Common-mode dV/dt noise cancellation circuit • Tolerant of negative transient voltage • Low dI/dt gate drive for better noise immunity • –40ºC to 125ºC operating range • Small footprint package：TSSOP20L/24L,173mil https://m.bldcmotor-driver.com/photo/domaindemo-39509/document/11610/JY213L.pdf