GROW GM66 Qrcode Barcode Scanner for Raspberry Arduino USB TTL Serial

Qrcode Barcode 2D 1D scanner for Raspberry Arduino Android Komputer Output USB Serial TTL 5V
Diskripsi

1. USB wired barcode scanner to capture 1D, 2D code on labels, paper, mobile phone or computer.
2. High-efficiency recognization and high upload speed for improving your working efficiency.
3. With buzzer for reminding you that the scanning successfully or not.
4. Compatible with USB and UART interface.
5. Over 180 configurable options
6. Macro support replace a string in the bar code with another
7. Programmable preamble postamble and termination strings
8.Superior reading performance utilizing advanced decoding algorithms

Spesifikasi
Decoding Ability:
1D: EAN- 8,EAN-13,UPC-A,UPC-E,Code 39,Code 93,Code 128,EAN128,Codebar,industrial 2 of 5,Interleave 2 of 5,Matrix 2 of 5,MSI,postal code ect.
2D: PDF417,QR Code ,Data Matrix ect.

Resolution: 0.10mm (4mil)
Reading Distance :25 - 250mm
Interfaces: USB2.0 \ UART
Type of Illuminant: 617nm LED(Aimer), 6500K LEDs(Illumination)
Scan Angle: Roll:0-360, Pitch:65or greater, Yaw:60or greater
Scanning angle Inclination angle: 34, Elevation angle 26 Print Contrast 30% minimum reflective difference
LED Indicator:Buzzer and bi-color light: Red-power, Blue-decoding Successfully
Operating Temperature:-20 degrees to 55 degrees
Storage Temperature:-40 degrees to 65 degrees
Temperature Humidity:5% to 95% Relative humidity, Non-condensing
Light Levels:0-85000LUX
Operating Voltage :5V
Operating Current :120mA