5.0/ 5.0
100% pembeli merasa puas
7 rating • 1 ulasan
5(7)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: 21
Subtotal
Rp800.000
1.0MPa 10Bar Digital Pressure Control Switch Controller - 220VAC
Rp800.000
Pilih warna: 220VAC
catatan :
1. Akurasi tidak disebutkan dlm spesifikasi dlm deskripsi dan manual book tetapi yang ada hanya precision (presisi) Precision beda dengan akurasi..bisa dicari di Google perbedaan nya.
2. komplain akurasi tidak akan diterima dan klopun ada harus dibuktikan dengan sertifikat kalibrasi yang dikeluarkan oleh lembaga kalibrasi yang berwenang dengan mengacu presisi.
3. setting ada limit bawah utk on dan limit atas otf. Maka dari itu akurasi tidak ditekankan..yg ditekan kan presisi..
Aplikasi:
- pompa air
- pompa oil
- kompresor
Specification:
- Brand new
- Wiring: 3 wires
- White: Positive
- Black: Negative
- Green& Yellow: Ground
- Relay Capacity: 220V AC 5A.
- Fluid Temperature: 80 degrees
- Socket type: International three flat pins plug
- Long Life: can be used continuously for more than 20 million times.
- Working Pressure Range: 0-1.0MPa (10Bar), matching with all pumps
- Thread sizes : G1/2"
- Cable length: the Long
- Output signal: active output
Features:
- Pressure transmitter inside, stable and accuracy.
- Switch of the pump during water shortage and on with water.
- MCU micro-computer process chip, safe and intelligent control.
- One-click set up on/off limit.
- Pressure overload : 150%
- Precision grade : 0.5%
Installation:
If the pump doesn't have a check valve, then a check valve must be installed in front of the pressure, in this case the pump may on/off ,or frequently.
When you turn on the tap water, if the pump is on/off time to time, please adjust the H valve to a larger valve.
If the pump keep runs with stopping, please lower the H valve, on the other hand, if the pump doesn't work, please set the L valve higher.
Package Included:
1x Digital Switch Controller
1 x English user manual
1. Akurasi tidak disebutkan dlm spesifikasi dlm deskripsi dan manual book tetapi yang ada hanya precision (presisi) Precision beda dengan akurasi..bisa dicari di Google perbedaan nya.
2. komplain akurasi tidak akan diterima dan klopun ada harus dibuktikan dengan sertifikat kalibrasi yang dikeluarkan oleh lembaga kalibrasi yang berwenang dengan mengacu presisi.
3. setting ada limit bawah utk on dan limit atas otf. Maka dari itu akurasi tidak ditekankan..yg ditekan kan presisi..
Aplikasi:
- pompa air
- pompa oil
- kompresor
Specification:
- Brand new
- Wiring: 3 wires
- White: Positive
- Black: Negative
- Green& Yellow: Ground
- Relay Capacity: 220V AC 5A.
- Fluid Temperature: 80 degrees
- Socket type: International three flat pins plug
- Long Life: can be used continuously for more than 20 million times.
- Working Pressure Range: 0-1.0MPa (10Bar), matching with all pumps
- Thread sizes : G1/2"
- Cable length: the Long
- Output signal: active output
Features:
- Pressure transmitter inside, stable and accuracy.
- Switch of the pump during water shortage and on with water.
- MCU micro-computer process chip, safe and intelligent control.
- One-click set up on/off limit.
- Pressure overload : 150%
- Precision grade : 0.5%
Installation:
If the pump doesn't have a check valve, then a check valve must be installed in front of the pressure, in this case the pump may on/off ,or frequently.
When you turn on the tap water, if the pump is on/off time to time, please adjust the H valve to a larger valve.
If the pump keep runs with stopping, please lower the H valve, on the other hand, if the pump doesn't work, please set the L valve higher.
Package Included:
1x Digital Switch Controller
1 x English user manual
Ada masalah dengan produk ini?