LCR Meter ET430 Bridge Tester Capacitance Inductance Resistance ET-430

- Dikirim dari Jakarta dengan kardus utk keamanan produk

LCR meter digunakan untuk mengukur impedansi (Inductance, Capacitance, Resistance) dari sebuah komponen

Produk berbahasa Inggris


====
Features:
Measurement frequency up to 100kHz, 1Hz step continuously adjustable
Support DC resistance, electrolytic capacitance measurement
Internal bias voltage output (10mV-500mV)
Component measurement automatic identification
Support screening and deviation measurement
2.8 inch TFT display, 4-1/2 display
Basic measurement accuracy is 0.2%, measurement speed can be adjusted
Large capacity lithium battery power supply, USB communication interface, support SCPI protocol
Manual and automatic range
With open circuit short circuit correction

Parameters:
Model: ET430
Test frequency: 100Hz, 120Hz, 1KHz, 10KHz,40kHz,100KHz
Basic accuracy: 0.30%
Display: 2.8 inch TFT
Display digits: main parameter 5 bits, sub-parameter 5bits
Measurement parameters: main parameter L/C/R/Z, sub-parameter: X/D/Q/ESR/θ
Electrolytic capacitor mode: Yes
DCR mode: No
Measuring range: L: 0.000μH~2000H; C: 0.000pF~20.000mF; R: 0.0001Ω~200.00MΩ
Measurement display speed: 1 time / sec (slow speed), 2 times / sec (medium speed), 4 times / sec (fast)
Internal offset: No
Test level: 0.6Vrms
Calibration function: open circuit calibration, short circuit calibration
Screening function: the screening limit range can be set from 1% to 50%, where the fixed point is 1%, 5%, 10%, 20%
Deviation measurement: used to compare the percentage deviation between the component and the set nominal value and display

Includes:
1 x ET430 Handheld LCR Meter
1 x Mini-USB Cable
1 x Power Adapter
1 x Red Black Rubber Plug