FPGA Digilent Cmod S7 Xilinx Spartan 7

/**********************/ Catatan: Harga tertera saat ini lebih mahal Rp. 200rb dari harga awal untuk menanggung biaya jastip. Lama waktu preorder: tergantung ketersediaan jastip. /**********************/ The Digilent Cmod S7 is a small, 48-pin DIP form factor board built around a Xilinx Spartan 7 FPGA. 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons - Full support for Vivado, including tool integration, example projects and tutorials - Breadboardable with 48-pin DIP form factor header - Pmod connector for add-on hardware devices - Programmable from JTAG and Quad-SPI flash -FPGA Specifications: Part Number: XC7S25-1CSGA225C Logic Slices: 3,650 6-input LUTs: 14,600 Flip-Flops: 29,200 Block RAM: 1,620 Kb DSP Slices: 80 Clock Resources: 3 PLLs 3 MMCMs: 12 MHz external clock Internal ADC: Dual-channel, 1 MSPS, connected to DIP pins 32 and 33 -Connectivity and On-board I/O: USB: USB-UART, USB-JTAG programmer Pmod Connectors: 1 Other Connectors: 48-pin DIP form factor header with 36 pins populated Buttons: 2 Push buttons LEDs: 4 LEDs, 1 RGB LED -Electrical Power Inputs: USB or 5V external source connected to DIP pin 24 Logic Level: 3.3V