Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp1.298.000
Analog Industrial pH Sensor / Meter Pro Kit V2 Gravity
Rp1.298.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 08 - Sensor
SKU : 296-482
Analog Industrial pH Sensor / Meter Pro Kit V2 Gravity
FEATURES
3.3~5.5V wide voltage input
Hardware filtered output signal, low jitter
Gravity connector and BNC connector, plug-and-play, no soldering required
The software library supports two-point calibration and automatically identifies standard buffer solution
Uniform size and connector, convenient for the design of mechanical structures
Industrial Probe - Support 7*24 Measurement
Upgraded Transmitter - More Accurate and Stable
SPECIFICATION
Signal Conversion Board (Transmitter) V2
Supply Voltage: 3.3~5.5V
Output Voltage: 0~3.0V
Probe Connector: BNC
Signal Connector: PH2.0-3P
Measurement Accuracy: ±0.1@25℃
Dimension: 42mm*32mm/1.66*1.26in
pH Probe
Probe Type: Industrial Grade
Detection Range: 0~14
Temperature Range: 0~60°C
Accuracy : ± 0.1pH (25 ℃)
Response Time: <1min
Probe Life: 7*24hours >0.5 years (depending on the water quality)
Cable Length: 500cm
Packing List :
pH Probe (Industrial Grade) x1
pH Signal Conversion Board V2 x1
Gravity Analog Sensor Cable x1
Waterproof Gasket x2
Screw Cap for BNC Connector x1
M3 * 10 nylon pillar x4
M3 * 5 screws x8
Wiki : https://www.dfrobot.com/wiki/index.php/Gravity:_Analog_pH_Sensor/Meter_Kit_V2_SKU:SEN0161-V2
Analog Industrial pH Sensor / Meter Pro Kit V2 Gravity
FEATURES
3.3~5.5V wide voltage input
Hardware filtered output signal, low jitter
Gravity connector and BNC connector, plug-and-play, no soldering required
The software library supports two-point calibration and automatically identifies standard buffer solution
Uniform size and connector, convenient for the design of mechanical structures
Industrial Probe - Support 7*24 Measurement
Upgraded Transmitter - More Accurate and Stable
SPECIFICATION
Signal Conversion Board (Transmitter) V2
Supply Voltage: 3.3~5.5V
Output Voltage: 0~3.0V
Probe Connector: BNC
Signal Connector: PH2.0-3P
Measurement Accuracy: ±0.1@25℃
Dimension: 42mm*32mm/1.66*1.26in
pH Probe
Probe Type: Industrial Grade
Detection Range: 0~14
Temperature Range: 0~60°C
Accuracy : ± 0.1pH (25 ℃)
Response Time: <1min
Probe Life: 7*24hours >0.5 years (depending on the water quality)
Cable Length: 500cm
Packing List :
pH Probe (Industrial Grade) x1
pH Signal Conversion Board V2 x1
Gravity Analog Sensor Cable x1
Waterproof Gasket x2
Screw Cap for BNC Connector x1
M3 * 10 nylon pillar x4
M3 * 5 screws x8
Wiki : https://www.dfrobot.com/wiki/index.php/Gravity:_Analog_pH_Sensor/Meter_Kit_V2_SKU:SEN0161-V2
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan