5.0/ 5.0
100% pembeli merasa puas
5 rating • 0 ulasan
5(5)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 30
Subtotal
Rp370.800
Ethernet and PoE Shield for Arduino W5500 Chipset
Rp370.800
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 02 - Arduino Shield Accessories
SKU : 433-078
Ethernet and PoE Shield for Arduino W5500 Chipset
FEATURES
Support hardware TCP/IP protocol: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
Support 8-channel independent Sockets
Support WOL Wake-on-LAN
Internal 32KB for TX/RX buffer
On-board level converter circuit
Gravity 3Pin ports for connecting sensors
SPECIFICATION
PoE Input: 48V AC/DC (the product is a Class 0 PD device that meets the 802.3at standard)
PoE Power: up to 12W (the VIN port can output 12V/1A)
SPI Clock: 80MHz (Max)
PHY: WIZnet W5500
PCB Size: 68.6mmx53.3mm / 2.68 x 2.1 inch
Overall Size: 72.5mmx53.3mm / 2.85 x 2.1 inch
SHIPPING LIST:
Ethernet & PoE Shield for Arduino-W5500 x1
2.54 Open-type Jumper Cap x1
Datasheet : https://wiki.dfrobot.com/Ethernet_and_PoE_shield_for_Arduino_W5500_SKU_DFR0850
Ethernet and PoE Shield for Arduino W5500 Chipset
FEATURES
Support hardware TCP/IP protocol: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
Support 8-channel independent Sockets
Support WOL Wake-on-LAN
Internal 32KB for TX/RX buffer
On-board level converter circuit
Gravity 3Pin ports for connecting sensors
SPECIFICATION
PoE Input: 48V AC/DC (the product is a Class 0 PD device that meets the 802.3at standard)
PoE Power: up to 12W (the VIN port can output 12V/1A)
SPI Clock: 80MHz (Max)
PHY: WIZnet W5500
PCB Size: 68.6mmx53.3mm / 2.68 x 2.1 inch
Overall Size: 72.5mmx53.3mm / 2.85 x 2.1 inch
SHIPPING LIST:
Ethernet & PoE Shield for Arduino-W5500 x1
2.54 Open-type Jumper Cap x1
Datasheet : https://wiki.dfrobot.com/Ethernet_and_PoE_shield_for_Arduino_W5500_SKU_DFR0850
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan