Efek Hall Magnetic Sensor dengan Analog & Digital output

Efek Hall Magnetic Sensor dengan Analog amp; Digital output Selama Barang/Produk Masih Tayang/Aktif Berarti (Stok Tersedia), Bisa Langsung Di Order/Di Beli (Tidak Perlu Chat Toko). Masukkan Keranjang Lalu Bayar. Saat itu Juga Barang/Produk Langsung Kami Kirim. Semua Produk Di Toko Kami Pre Order 6 - 15 Hari Tergantung Stok dan Posisi Gudang Luar Negeri. Anda Order Berarti Anda Setuju Dengan Waktu Pre Order Yang Kami Tetapkan Secara Default 6 - 15 Hari. Feature:;The Hall Effect Magnetic Sensor can be used for detect the presence (or absence!) of nearby objects such as magnets.If no magnetic field is present, the signal line of the sensor is HIGH (on digital out). If a magnetic field is presented to the sensor, the signal line goes LOW (on digital out), at the same time the LED (blue) on the sensor lights up.;The distance detection to a magnetic object can be adjusted via the potentiometer on board.It also has the Analog output, to determine the magnitude of a magnetic field or the distance to an object.The polarity of the magnetic field is of influence to the switching action. The front side of the sensor needs the opposite polarity as the back of the sensor to switch on.;Connection:;GND =; to GNDVCC =; to 5VDO = to any Digital P/OAO = to any Analog InDocuments:;Dimensional drawing: Click here to openPinout: Click here to openSchematic: Click here to open;Package includes:1 x;Hall Effect Magnetic SensorSketch (Arduino):#define SENSOR = 3; // define the Hall (magnetic) sensor Digital I/O#define LED = 13; // LED D13; void setup (){ pinMode (LED, OUTPUT) ; // LED on D13 pinMode (SENSOR, INPUT) ; // Hall (magnetic) sensor on D3}; void loop (){ if (digitalRead (SENSOR) ==LOW) // read seonsor and when the Hall sensor detects a magnetic field Arduino LED lights up { digitalWrite (Led, HIGH); } { digitalWrite (Led, LOW); SKU1654895