Lutron DW-6195 3 Phase Power Analyzer w/ Harmonic Measurement DW- Best

FEATURES
◆ Analysis for 3 phase multi-power system, 1P/2W, 1P/3W, 3P/3W, 3P/4W
◆ 3 current probes (CP-1201) are included, if change the current probes, the calibration procedures are not necessary
◆ Current probe input signal/ranges with selection
- Input signal (ACV) 200 mV/300 mV/500 mV/1 V/2 V/3 V
- Ranges (ACA) 20 A/200 A/2000 A/30 A/300 A/ 3000 A
◆ Meter can cooperate the universal current probes
◆ Complete set with 4 PCs Test Leads, 4 PCs Alligator clips, 3 PCs Clamp Probe (CP-1201), AC to DC 9V adapter, 2GB SD memory card and Carrying bag
◆ Measurement V (phase-to-phase), V (phase-to-ground), A (phase-to-ground)
- KW / KVA / KVAR / PF (phase)
- KW / KVA / KVAR / PF (system)
- KWH / KVAH / KVARH / PFH (system) Phase angle
◆ Harmonics display (1-50th order)
◆ Simultaneous display of Harmonics and Wave form
◆ Display of Waveform with Peak Values
◆ Analysis of Total Harmonic Distortion (THD)
◆ Graphic Phase diagram with 3-Phase system parameters
◆ 3 phase Voltage or Current Unbalanced Ratio (VUR, AUR) and Unbalanced Factor
◆ Interested? Please dont hesitate to call us @
◆ OR wa us
◆ Calculated Unbalanced Current through Neutral (An)
◆ Capture Transient events (including Dip, Swell and Outage) with programmable threshold (%)
◆ Programmable CT ratio (1 to 600) and PT ratio (1 to 1000)
◆ ACV input impedance is 10 Mega ohms
◆ Safety Standard IEC 1010, CAT III 600V
◆ User can order the meter only (without the current probes) with the special request as intend to cooperate their own current probes

EACH UNIT INCLUDES WITH
◆ Instruction manual
◆ Test Leads (TL88-4AT), 1 Set (4 PCs)
◆ Alligator clips (TL88-4AC), 1 Set (4 PCs)
◆ Clamp Probe (CP-1201), 3PCs
◆ AC to DC 9V adapter, 1 PC
◆ SD card (2 GB), 1 PC
◆ Carrying bag, 1 PC