DJI Osmo Mobile 8 - Smartphone Gimbal Stabilizer kamera

Dimensions
Unfolded: 288×107×96 mm (L×W×H)
Folded: 190×95×46 mm (L×W×H)

Weight
Gimbal + Built-in Tripod + Magnetic Phone Clamp + Multifunctional Module: Approx. 370 g
Data was collected in a controlled environment. Actual experience may vary.

Extension Rod
Built-in Extension Rod

Max Extension Length
215 mm

Compatible Phone Weight
170-300 g

Compatible Phone Thickness
6.9-10 mm

Compatible Phone Width
67-84 mm

Bottom Port
1/4-20 UNC port


BATTERY
Type
Li-Po 1S

Capacity
3350 mAh

Energy
12.06 Wh

Charging Temperature
5° to 40° C (41° to 104° F)

Operating Temperature
0° to 40° C (32° to 104° F)

Operating Time
Approx. 10 hours
(Measured with the gimbal balanced in a level and stationary state without additional accessories)
With the Multifunctional Module's intelligent tracking feature enabled and the fill light off, the operating time is approximately 5 hours. When the intelligent tracking feature is on and the fill light is set to maximum brightness, the operating time is approximately 4 hours. Using the gimbal to charge your smartphone will shorten the gimbal's operating time.

Charging Time
Approx. 2.5 hours
(Measured with a 10W USB-C charger)

Gimbal Charging Port
USB-C

Phone Charging
Supported


GIMBAL
Controllable Range
Pan: 360° (unlimited rotation)
Roll: -67° to 245°
Tilt: -20° to 40°

Mechanical Range
Pan: 360° (unlimited rotation)
Roll: -77° to 255°
Tilt: -224° to 100°

Max Control Speed
120°/s

Wireless Mode
Bluetooth 5.3

Software
App DJI Mimo

Tripod Dimensions
Length: 67 mm


MULTIFUNCTIONAL MODULE
GFSK
2 Mbps

GFSK Transmitter Power (EIRP)

GFSK Operating Frequency
2.4000-2.4835 GHz

Bluetooth Protocol
Bluetooth 5.3

Bluetooth Transmitter Power (EIRP)

Bluetooth Operating Frequency
2.4000-2.4835 GHz

Fill Light Illuminance
40 lux
This represents the maximum brightness measured at a distance of 0.6 meters from the subject and should be used for reference only.

Fill Light Color Temperature
2500-6000 K