RCX USB Linker V2 Programmer (For XM Series ESCs)

RCX USB Linker V2 Programmer (For XM Series ESCs) This USB Link programmer is for you to program and configure the XM Series BLHeli ESCs via the BLHelisuit software. You can use this USB Link Programmer with the following ESCs (tested and confirmed). RCX07-347 - RCX 10A (eXtreme Series) BLHeli Multirotor ESC RCX07-416 - RCX 20A (eXtreme Series) BLHeli Multirotor ESC We are unable to guarantee this USBLink would work if you use this USBLink with any other ESC rather than listed above. We are unable to provide private tutorial for this USBLinker because mostly are computer issues: Make sure the ESC Servo Connector has connected correctly to the USB (becareful the Signal and GND cables) Go to the \Device Manager\ of your OS and see which COM PORT the USB is there. Make sure there is no \Exclamation Mark\ on the COM PORT under \Device Manager r Make sure the correct COM PORT is selected in BLHeliSuite Make sure to connect the battery just before/after you click the \Connect\ button You can also use Arduino Tool to flash the ESC if you have. If you have more questions, please try to Google and search on YouTube, there are lots of tutorials. ** We have tested it on Win 7 PC. ** Warning: This USB Linker does not work with the SN and Super Mini series ESC