Pitch & Timbre DAMP 1210 12 Channel DSP 10 Ch Amplifier 940W 4 Ch RCA

https://pat.audioworkshop.co.id/product/damp-1210/ Active range gt;= 100 dB S/N ratio gt;= 100dB THD lt;= 0,02% Frequency response 20 Hz - 20 kHz Low level input impedance 20 K High level input impedance 240 Low level output impedance 51 Output power (max) 8 x 80 W, 2 x 150 W Signal input range (max) RCA 8 Vpp Signal input range (max) high level 26 Vpp Signal output range (max) RCA 9 Vpp Ambient temperature -40 - 75 C Storage temperature -40 - 85 C Supply voltage DC 9 - 15 V Turn-on REM input High level start (FL+/FL-), ACC start optional Turn-on REM output +12V starting voltage output (0,1A) Power consumption lt;= 0,1 W Input signal type 10-channel high level, 4-channel low level RCA, OPT Output signal type 12-channel low level RCA, 10 channels of power Output signal gain range: mute, -59dB to 6dB Output signal equalizer: 31-band equalizer engine: 1. frequency range: 20Hz~20KHz, resolution 1Hz 2. Q value (slope or slope) 0.404~28.852 3.Gain: -20.0dB~+20.0dB, resolution 0.1dB Output signal frequency divider: Each output is equipped with a high-low pass independent filter. 1. professional filter types: Link-Ril, Butter-W and Bessel 2. Filter crossover point: 20Hz-20KHz Resolution: 1Hz 3. Filter slope (slope) setting: 6dB/Oct to 48dB/Oct Output phase and delay Phase and delay adjustments are available for each output channel, parameter range: Phase: in phase or inverting (0/180) Delay: 0.000 to 20 mil, 0.00 to 692 cm, 0.00 to 272.44 inches Scene operator The machine can save 6 preset music scene