OSDoge OSD for the Naze32, Drone racing, FPV,

Details The OSDoge OSD is the perfect companion for the Naze32 flight controller. Plug it in, flip the switch. Stack your Naze32 on top to add OSD, LC Filter, 5V and 12V clean power, and handy current/voltage sensor inputs. Features 12v and 5v clean power supplies for your FPV camera and VTX Onboard LC power filter Mini USB connector for direct connection to a computer Works with 3S and 4S batteries Plugs right into your naze! Stacks with 10mm standoffs, included Software Downloads Download the OSDoge Handbook : http://www.dtfuhf.com/images/osdoge/OSDoge%20Handbook%20v1.pdf You can down the MWOSD release 1.2 here: http://www.dtfuhf.com/MW%20OSD%20R1.2.zip The 1.2+ configurator, which works on all platforms, can be downloaded here: http://www.dtfuhf.com/MW%20OSD%20GUI%20R1.2+.zip Please note that an up-to-date version of Java is required to use the Configurator program, and an up-to-date version of Arduino is required to update firmware. http://arduino.cc/en/Main/Software#toc2 The usb-serial adaptor drivers for OSDoge can be found here: http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx