ToolkitRC M6 V2 150W Smart Balance Charger / Discharger 2-6S Lipo Lihv

The Toolkit RC M6 is the a small 150w color screen charger! At heart, the M6 is a small and compact charger, but boasts a wide array of other features not found in chargers on the market. Additional functionality includes a servo tester, battery cell checker, watt meter (power meter), PWM/PPM/S.Bus input testers (for receiver testing), as well as output generators that offer variable voltage and amperage with DC current.

Toolkit M6 Features:
Battery Charger
Cell Checker
Servo Tester
PWM,PPM, S.Bus Input/output & Receiver tester
Viable AMP/Volt DC Power supply (Requires external DC input)
Charger Features:
Lithium battery cut-off voltage can be set (TVC function)
Measure battery voltage, internal resistance, balance
Measure PWM,PPM, S.Bus signal values @ 1ms accuracy
Output PWM, PPM, S.Bus standard signal @ 1ms accuracy
Customizable 1-28V constant output voltage, 1-10A constant output current
Multi-language optional
USB 2.1A@5.0V Output (Mobile device charging)
Udisk firmware upgrade (Slave device)

Specifications:
Input voltage: 7.0-28V
Type of battery: Lipo, LiHV, LiFe, Lion @ 1-6S, NiMh @ 1-16S, Pb @ 1-10S
Charge power: 150W / Up to 10A
Discharge power: Recycle Mode: 150W/ Up to 10A Normal Mode: 8W @ Up to 2A
USB: 2.1A @ 5.0V (Mobile Charging) or USB Firmware updating
Dimensions: 68x49x26mm
Weight: 80g
LCD: 1.8inch TFT RGB, 160x128 Pixel

Measurement:
PWM: 880-2200us @ 20-400Hz
PPM: 880-2200us*8CH @ 20-50Hz
SBUS: 880-2200us*16CH @ 20-100Hz
Voltage: 1.0-5.0V @ 1-6S
IR: 10-99mR @ 1-6S

Output:
PWM: 500-2500us @ 20-1000Hz
PPM: 880-2200us*8CH @ 50Hz
SBUS: 880-2200us*16CH @ 74Hz
Power: 1-10A @ 1-28V Mode:CC+CV