5.0/ 5.0
100% pembeli merasa puas
66 rating • 14 ulasan
5(66)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 83
harga sebelum diskonRp45.000
Subtotal
Rp41.600
NodeMCU LOLIN V3 MODUL WIFI ESP8266
Rp41.600
diskon 8%
Harga sebelum diskon Rp45.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Mikrokontroler
HIGH QUALITY PRODUCT
Modul WiFi yang dapat diprogram menggunakan software Arduino IDE, Sangat bermanfaat agan untuk membuat proyek IoT dll.
Kita juga menjual produk terkait untuk support modul/ kontroler ini :
1. Base board NodeMCU LOLIN : https://www.tokopedia.com/dtproduction/nodemcu-base-board-project-board-pcb-iot-v3-ch340
2. Power Adaptor 9v : https://www.tokopedia.com/dtproduction/adaptor-9v-2a-untuk-arduino-dan-perangkat-elektronik-kualitas-bagus
3. Kabel Programmer Micro USB : https://www.tokopedia.com/dtproduction/kabel-data-micro-usb-untuk-nodemcu-esp32-0-5m-high-quality
4. GPIO extender : https://www.tokopedia.com/dtproduction/i2c-i-o-pcf8574-pcf8574t-modul-penambah-gpio-arduino-nodemcu
- Uses CH340G instead of CP2102.
- NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for superior stability on all supported platforms.
- Communication interface voltage: 3.3V.
- Antenna type: Built-in PCB antenna is available.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support STA/AP/STA + AP three operating modes
- Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
- D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
- AD0: 1 channel ADC
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Current: continuous transmission: 70mA (200mA MAX), Standby: 200uA
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Working temperature: -40 ~ + 125
- Drive Type: Dual high-power H-bridge driver
-- Flash size: 4MByte
Modul WiFi yang dapat diprogram menggunakan software Arduino IDE, Sangat bermanfaat agan untuk membuat proyek IoT dll.
Kita juga menjual produk terkait untuk support modul/ kontroler ini :
1. Base board NodeMCU LOLIN : https://www.tokopedia.com/dtproduction/nodemcu-base-board-project-board-pcb-iot-v3-ch340
2. Power Adaptor 9v : https://www.tokopedia.com/dtproduction/adaptor-9v-2a-untuk-arduino-dan-perangkat-elektronik-kualitas-bagus
3. Kabel Programmer Micro USB : https://www.tokopedia.com/dtproduction/kabel-data-micro-usb-untuk-nodemcu-esp32-0-5m-high-quality
4. GPIO extender : https://www.tokopedia.com/dtproduction/i2c-i-o-pcf8574-pcf8574t-modul-penambah-gpio-arduino-nodemcu
- Uses CH340G instead of CP2102.
- NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for superior stability on all supported platforms.
- Communication interface voltage: 3.3V.
- Antenna type: Built-in PCB antenna is available.
- Wireless 802.11 b/g/n standard
- WiFi at 2.4GHz, support WPA / WPA2 security mode
- Support STA/AP/STA + AP three operating modes
- Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
- D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
- AD0: 1 channel ADC
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Current: continuous transmission: 70mA (200mA MAX), Standby: 200uA
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Remote firmware upgrade (OTA)
- Support Smart Link Smart Networking
- Working temperature: -40 ~ + 125
- Drive Type: Dual high-power H-bridge driver
-- Flash size: 4MByte
Ada masalah dengan produk ini?