SPECIFICATIONS (MV7x XLR) •Type: Dynamic (moving coil) •Polar Pattern: Unidirectional (cardioid) •Frequency Response: 50 Hz to 16,000 Hz •XLR Sensitivity: at Minimum Gain, Flat Mode -55 dBV/Pa (1.78 mV) at 1 kHz 1 Pa = 94 dB SPL •XLR Output Impedance: 252 Ω at 1 kHz •Connector Type: XLR •Mounting Type: 5/8"-27 thread mount •Housing: All-metal construction •Net Weight: 0.55 kg (1.21 lbs) •Dimensions: Microphone: Length 53.6 mm; Diameter 66.5 mm Mic in Yoke: 164 x 153.6 x 90.2 mm H × L x D
Spesifkasi MV7+ Transducer Type: Dynamic (moving coil) Polar Pattern: Unidirectional (Cardioid) A/D Converter: 16 or 24-bit, 44.1 or 48 kHz Frequency Response: 50 Hz to 16,000 Hz Adjustable Gain Range: 0 to +36 dB Sensitivity: (@ 1 kHz, open circuit voltage with XLR connection) -55 dBV/Pa [1][2] (1.78 mV) (@ 1 kHz, open circuit voltage with USB-C connection) -33 dBV/Pa [1][2] USB-C Maximum SPL: 128 dB SPL [2] On-Board DSP?: Auto-Level Mode, Real-time Denoiser, Tone Slider, Reverb, Compressor, Limiter, High-Pass Filter Headphone Output: 3.5 mm (1/8″) Power Requirements: USB Audio Class 2 (UAC2), Powered through USB-C bus power (USB 2.0 or higher) MFi Certified: Yes Software Compatibility: Output Impedance (at 1 kHz with XLR connection): 350 Ω at 1 kHz Connector Type: USB-C and XLR Mounting Type: 5/8" - 27 thread mount Housing: Diecast aluminum Net Weight: 573.5 g (1.26 lbs) Cable: Includes one (1) 3m USB-C to USB-C cable