4.3/ 5.0
100% pembeli merasa puas
3 rating • 1 ulasan
5(1)33.33%
4(2)66.67%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp19.500
Sensor Aliran Air HAL Water Flow Sensor Dispenser Mesin Kopi Pipa QC
Rp19.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Komponen
Flow sensor banyak dipakai pada mesin dispenser air, kopi, cairan.
Mendeteksi aliran air / cairan dengan mengunakan sistem Hall Effect.
Bisa digunakan untuk project arduino.
Ukuran pipa 63-65mm Quick Connect
Key Specifications/Special Features:
1. Pressure MPa: 10-150psi
2. Frequency detection error: ±10%
3. Apply the liquid: 1 to 30℃ water
4. Flow detection method: HALL SENSOR
5. Minimum flow perception: 0.3L/min
6. Allow the surrounding temperature: 40°C
7. Power source specification: 5V DC
8. Largest water pressure resistance: 10kg/cm2
9. Lead the color:
Red: power (power line, XH-K3 PIN1)
White: output (output, XH-K3 PIN2)
Black: ground (ground electrode, XH-K3 PIN3)
10. Wire specifications: UL 1007 #22 AWG
11. Length of the wire: 950±15mm
12. Connect the metal terminals: SXH-001T-P0.6, JST brand
13. Connector: XH-K3 (with a lock, retaining appliance)
14. Outgoing line can sustain tension: 80N continues 10S
15. Maximum flow capacity5L/min above
Flow/minute 0.3L 0.5L 1.0L 1.5L 2.0L
Hz/second 9.5 20.8 45.8 72.5 90.8
H (+10%) 627 1375 3025 4785 5995
H (-10%) 513 1125 2475 3915 4905
Mendeteksi aliran air / cairan dengan mengunakan sistem Hall Effect.
Bisa digunakan untuk project arduino.
Ukuran pipa 63-65mm Quick Connect
Key Specifications/Special Features:
1. Pressure MPa: 10-150psi
2. Frequency detection error: ±10%
3. Apply the liquid: 1 to 30℃ water
4. Flow detection method: HALL SENSOR
5. Minimum flow perception: 0.3L/min
6. Allow the surrounding temperature: 40°C
7. Power source specification: 5V DC
8. Largest water pressure resistance: 10kg/cm2
9. Lead the color:
Red: power (power line, XH-K3 PIN1)
White: output (output, XH-K3 PIN2)
Black: ground (ground electrode, XH-K3 PIN3)
10. Wire specifications: UL 1007 #22 AWG
11. Length of the wire: 950±15mm
12. Connect the metal terminals: SXH-001T-P0.6, JST brand
13. Connector: XH-K3 (with a lock, retaining appliance)
14. Outgoing line can sustain tension: 80N continues 10S
15. Maximum flow capacity5L/min above
Flow/minute 0.3L 0.5L 1.0L 1.5L 2.0L
Hz/second 9.5 20.8 45.8 72.5 90.8
H (+10%) 627 1375 3025 4785 5995
H (-10%) 513 1125 2475 3915 4905
Ada masalah dengan produk ini?