Atur jumlah dan catatan
Stok Total: 240
Subtotal
Rp237.000
L298N Modul Papan Driver L298 Motor Stepper Robot Mobil Pintar Papan Tempat Memotong Roti Peltier Driver Motor Daya Tinggi UNTUK Arduino
Rp237.000
- Kondisi: Baru
- Waktu Preorder: 28 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
L298N driver board module L298 stepper motor smart car robot breadboard peltier High Power Motor Driver For Arduino
L298N Modul Papan Driver L298 Motor Stepper Robot Mobil Pintar Papan Tempat Memotong Roti Peltier Driver Motor Daya Tinggi UNTUK Arduino
Deskripsi :
Condition : New
Type : Logic ICs
Origin : Mainland China
L298N driver board module L298 stepper motor smart car robot breadboard peltier High Power Motor Driver For Arduino
Features:
Module name : dual H bridge motor drive module
Work mode : H bridge drive (double road)
Main control chip : L298N
Logical voltage : 5V
Drive voltage : 5v-35v
Logical current : 0mA-36mA
Driving current : 2A(MAX single bridge)
Storage temperature
: - 20 to + 135
Maximum power
: 25W
Weight: 30 g
Peripheral dimensions : 43*43*27mm
Product features:
This module USES L298N as the main drive chip, with strong driving ability, low heat and strong anti-interference ability.
Through this module can use the built-in 78 m05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.
This module USES a large capacity filter capacitance, a continuation protection diode, can improve reliability.
Notes:
1. When you are driving voltage (above logo for the 12 v input, can actually accept input range is 7 to 12 v) for 7 v to 12 v, can make to onboard power supply 5 v logic, when using the onboard after 5 v power supply, interface of + 5 v
The power supply does not input voltage, but can yield 5V voltage for external use.
2. When the driving voltage is higher than 12V, it is less than or equal to 24V
(the chip manual proposes to support 35V, but according to the book
When the maximum voltage is applied to the maximum voltage of 298 conservative applications
SELAMAT BELANJA, TERIMAKASIH.
L298N Modul Papan Driver L298 Motor Stepper Robot Mobil Pintar Papan Tempat Memotong Roti Peltier Driver Motor Daya Tinggi UNTUK Arduino
Deskripsi :
Condition : New
Type : Logic ICs
Origin : Mainland China
L298N driver board module L298 stepper motor smart car robot breadboard peltier High Power Motor Driver For Arduino
Features:
Module name : dual H bridge motor drive module
Work mode : H bridge drive (double road)
Main control chip : L298N
Logical voltage : 5V
Drive voltage : 5v-35v
Logical current : 0mA-36mA
Driving current : 2A(MAX single bridge)
Storage temperature
: - 20 to + 135
Maximum power
: 25W
Weight: 30 g
Peripheral dimensions : 43*43*27mm
Product features:
This module USES L298N as the main drive chip, with strong driving ability, low heat and strong anti-interference ability.
Through this module can use the built-in 78 m05 drive power supply parts of their work, but in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.
This module USES a large capacity filter capacitance, a continuation protection diode, can improve reliability.
Notes:
1. When you are driving voltage (above logo for the 12 v input, can actually accept input range is 7 to 12 v) for 7 v to 12 v, can make to onboard power supply 5 v logic, when using the onboard after 5 v power supply, interface of + 5 v
The power supply does not input voltage, but can yield 5V voltage for external use.
2. When the driving voltage is higher than 12V, it is less than or equal to 24V
(the chip manual proposes to support 35V, but according to the book
When the maximum voltage is applied to the maximum voltage of 298 conservative applications
SELAMAT BELANJA, TERIMAKASIH.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan