AAwhoop 65 Micro Drone

AAwhoop is the smoothest 65mm 1s whoop with fine tunning from us. With the F3 Brushed flight controller V2 with Frsky RX and 716 19000kv brushed motors, it only weighs 25g without batteries. AAwhoop using Caddx Beetle 5.8Ghz 48CH 25mW CMOS 800TVL Micro FPV Camera always trys to provide more clear view for every FPV pilots. With V3 whoop frame make faster and lighter, and you will have different experience in control. Also, it is powered by 3.7V 300mah with latest BT2.0 Connector which makes it an absolute choice for longer flight time. What more do you want from 65mm brushed whoop? Best of the best is included in this tiny whoop. SPECIFICATION: Weight: 25g (without battery) Frame: V3 Whoop Frame Board: F3 Brushed flight controller V2 with Frsky RX + OSD Motors: 7x16mm 19000KV with connector Props: HQprop 1.2x1.2x4, 0,8mm shaft hole Camera: Caddx Beetle 5.8Ghz 48CH 25mW CMOS 800TVL Micro FPV Camera Receiver Option: Frsky D8 potocol (SBUS) amp; Bayang Protocol Battery: 3.7V 300mah 3.7v 1S 45C Battery w/ BT2.0 Connector - 1pcs FC amp; ESC SPECIFICATIONS: * CPU: STM32F303CCT6 * Six-Axis: MPU6000 * ESC: All FETs are rated at 30A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors. * Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern * Firmware version: BETAFLIGHTF3 3.2.0 * OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) * Receiver: Frsky D16/D8 potocol (SBUS) * Power Cable: 55mm, with BT 2.0 connector (2020 Edition) * Weight: 3.5g  CAMERA SPECIFICATIONS: * Image Sensor : 1/4 #34; CMOS sensor * Horizontal : 800TVL * TV System : NTSC/PAL., * Power Input : DC 2.5-5.5 * Frequency Band : 5.8G * Transmitting Power : 25mW * Power Comsumption : 300mA * Channel : 48CH * Dimension : 14.9 x 12.4mm * Net Weight : 2.9g(more or less) * Aspect Ratio : 4:3