IFLIGHT BLITZ Mini F7 Stack (Mini F7 V1.1 + 55A 4in1 ESC) - FC only

FC // BLITZ Mini F7 V1.1 Flight Controller
Top Features:

- IMPROVED CIRCUIT DESIGN, BETTER COMPONENTS AND LOWER ELECTRICAL NOISE!

- DJI HD VTX CONNECTOR (PLUG-AND-PLAY / NO SOLDERING REQUIRED)

- FC INDICATOR LEDS FOR VISUAL DEBUGGING



CHANGELOG:

- 2022/FEB: VERSION UPDATED TO V1.1 / GYRO CHANGED TO BOSCH BMI270 DUE TO AVAILABILITY & PRICE ISSUES WITH MPU6000.




Specs:

MCU:STM32 F722

GYRO:BMI270

BAROMETER:DPS310

OSD CHIP:AT7456

FLASH:16MB (BLACKBOX FLASH)

UARTS:6

MOTOR OUTPUTS:4X (SH1.0 CONNECTOR)

I2C SERIAL:SDA / SLA PADS

SMARTAUDIO / IRC TRAMP VTX PROTOCOL SUPPORTED

LED CONTROLLER:YES

BEEPER PAD:YES

FIRMWARE TARGET:IFRC-IFLIGHT_BLITZ_F722

MOUNT PATTERN:20X20 MM / 4MM PCB HOLE DIAMETER, SILICON GROMMETS FOR M3 SCREWS

DIMENSIONS:30.5X27 MM

WEIGHT:5G



WIRING SUGGESTION:

- UART 1 FOR VTX HD / ANALOG

- UART 2 FOR A RECEIVER

- UART 3/4/5 FOR GPS OR OTHER SENSORS THAT REQUIRE A SERIAL PORT

- UART 6 FOR ESC TELEMETRY



TIPS

1. F722 MCU HAS AN INNER INVERTER.

2. SBUS, CRSF, ELRS, IBUS, DSM ETC... CAN BE CONNECTED TO ANY UNUSED UART_RX, WE SUGGEST YOU CONNECT TO UART_RX2

3. FRSKY SMARTPORT, TRAMP & SMARTAUDIO CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX1

4. F.PORT CAN BE CONNECTED TO ANY UNUSED UART_TX, WE SUGGEST YOU CONNECT TO UART_TX2




ESC // BLITZ Mini E55 4-IN-1 2-6S ESC



SPECIFICATION:

- DIMENSION: 35*42MM

- MOUNTING HOLES: 20*20MM/Φ4MM

- WEIGHT: 11.3G

- SUPPORTS 2-6S LIPO INPUT

- MCU： G071

- CONSTANT: 55 AMPS

- BURST: 60 AMPS

- CURRENT SENSOR: YES

- BEC: NO

- CURRENT RATE: 100

- SUPPORTS: DSHOT DSHOT150/300/600/MULTISHOT/ ONESHOT ETC.

- FIRMWARE: BLHELI 32

- TARGET:IFLIGHT_BLITZ_G1


Package included:


- 1pc x BLITZ Mini F7 V1.1 Flight Controller

- 1pc x BLITZ Mini E55 4-IN-1 2-6S ESC

- 1set x silicon grommets

- 1set x wire harness for F7 Flight controller