Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp215.000
Cytron 13Amp 6V-30V DC Motor Driver MD13S with Non-soldered Terminal Blocks
Rp215.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Cytron
Hi #RekanEasyWare ...
EasyWare Part#: EP000541
Catatan:
- Foto real stok EasyWare Electronics.
- Produk 100% Original
- Spesifikasi dan drawing disertakan dislide terakhir
Brushed motor is the most widely used motor because of the ease of operation. Just supply the two terminals DC power supply, the motor will start rotating! Yet, you need a good motor driver to control the speed and direction from microcontroller. You are at the right page, MD13S is one of the easiest to use brushed motor driver.
Features:
- Bi-directional control for 1 brushed DC motor
- Support motor voltage from 6V to 30VDC
- Maximum current up to 13A continuous and 30A peak (10 seconds)
- GROVE compatible
- 3.3V and 5V logic level input.
- Solid state components provide faster response time and eliminate the wear and tear of mechanical relay
- Fully NMOS H-Bridge for better efficiency and no heat sink is required
- Regenerative Braking
- Speed control PWM frequency up to 20KHz (Actual output frequency is same as input frequency)
- Support both locked-antiphase and sign-magnitude PWM operation, *NOT RC (Radio Control) PWM
- SMD compatible
- RoHS, FCC and CE compliance
- Dimension: 61mm x 33mm
Kelengkapan:
- MD13S with Non-soldered Terminal Blocks
- 1 x MD13S motor driver board
- 1 x Green + Black 2-way terminal blocks (Non-soldered)
- The terminal block, normally Black is for Motor, and Green is for Power
- 1 x Grove connector (Grove to Grove)
EasyWare Part#: EP000541
Catatan:
- Foto real stok EasyWare Electronics.
- Produk 100% Original
- Spesifikasi dan drawing disertakan dislide terakhir
Brushed motor is the most widely used motor because of the ease of operation. Just supply the two terminals DC power supply, the motor will start rotating! Yet, you need a good motor driver to control the speed and direction from microcontroller. You are at the right page, MD13S is one of the easiest to use brushed motor driver.
Features:
- Bi-directional control for 1 brushed DC motor
- Support motor voltage from 6V to 30VDC
- Maximum current up to 13A continuous and 30A peak (10 seconds)
- GROVE compatible
- 3.3V and 5V logic level input.
- Solid state components provide faster response time and eliminate the wear and tear of mechanical relay
- Fully NMOS H-Bridge for better efficiency and no heat sink is required
- Regenerative Braking
- Speed control PWM frequency up to 20KHz (Actual output frequency is same as input frequency)
- Support both locked-antiphase and sign-magnitude PWM operation, *NOT RC (Radio Control) PWM
- SMD compatible
- RoHS, FCC and CE compliance
- Dimension: 61mm x 33mm
Kelengkapan:
- MD13S with Non-soldered Terminal Blocks
- 1 x MD13S motor driver board
- 1 x Green + Black 2-way terminal blocks (Non-soldered)
- The terminal block, normally Black is for Motor, and Green is for Power
- 1 x Grove connector (Grove to Grove)
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan