LIPO 3S GTFDR 11.1V BATERAI RC HARD SHELL 5200MAH 100C XT60 1/10 1/8 - 5200mah 100c, XT60

Key Point:

- Stable automatic stacking technology enables single-cell capacities .

- Higher capacity during heavy discharge. More than 90% at 100% C rate.

- Fast charge capable, up to 5C on some batteries.

- Longer Cycle Life, almost double that of standard lipoly technology.

- Friendly after-sales support and after-sales guarantee.

Parameter Description:

11.1V 5200mah 100C lipo HardCase size: 138*47*36mm weight 380g.


Warm Reminder:

1. Before using it, please full charge it with specific lipo balance charger;
2. Charge lipo battery no more than 4.20V per cell. As for battery pack in series, Please choose balance charging mode or charge each cell respectively;
3. Charging temperature must range in 15-35 Celsius, reverse charging is prohibited;
4. The voltage difference between any two cells should be in 0.03V, or charge is advised to balance the voltages beforeusage;
5. Please make sure the cut-off voltage is not lower than 3.4V, we highly recommend not lower than 3.6V;
6. Never discharge battery with current over the designed maximum continuous discharging current. After over current discharge, the performance will be deteriorated and cycle life will be shortened, causing overheating and even welling ,breakage, internal short-circuited etc;
7. If the surface temperature exceeds 65 Celsius while functioning, the battery should be suspended using until it cool down to ambient temperature naturally. Higher temperature may result int battery swelling and performance;
8. Do regularly charge discharge for maintenance(about 1-3 times every 3 months),battery must stored at about 3.85v/cell;
9. Do store battery at a place with low-humidity and free from corrosive gas within the temperature ranged from -20 Celsius to +40 Celsius
10. Under any circumstances dis-assembly of battery is prohibited.