ABB OVR T2 3N 80-275s P QS Surge Protective Device 2CTB815708R2000

ABB OVR T2 3N 80-275s P QS Surge Protective Device 2CTB815708R2000 Surge protective devices SPD type 2 protect low-voltage consumer systems against surge voltages as they are tested as SPD type 2 according to IEC 61643-11. The devices are compatible with the System pro M compact series. The SPD with #34;TS #34; are optionally equipped with a auxiliary contact. The variants with #34;reserve varistor #34; (s) offer additional protection for the system, as the SPD is not completely disconnected from the mains at the end of its service life, but with an additional smaller varistor still guarantees basic protection and the system thus until the surge arrester is replaced is still protected Technical Standards: IEC 61643-11 / EN 61643-11 Product Name: Surge Protective Device Type of Low Voltage Distribution System: TT TN-S Suitable For: To protect the systems against the transient overvoltage (lightning) Rated Voltage (Ur): 230 V AC Nominal AC Voltage of the System (Uo): 230 / 400 V Voltage Rating DC: 350 V Voltage Protection Level ( Up): 1.4 kV (L-N) 1.4 kV (N-PE) 1.4 kV (L-PE) 1.5 kV Maximum Continuous Operating Voltage (Uc): (L-PE) 275 V (L-L) 440 V (L-N) 275 V (N-PE) 275 V Temporary Overvoltage Test Value (UT): (L-N) 337 V (N-PE) 1200 V Rated Service Short-Circuit Breaking Capacity (Ics): 100 kA Discharge Current: Nominal 20 kA Maximum 80 kA Total 80 kA Nominal (8 / 20 µs) 20 kA I (max, 8 / 20 µs) 80 kA Impulse Current: I (imp, 10 / 350 µs) 6.25 kA Short Circuit Withstand Icc: 100 kA Power Loss: 49 mW Short-Circuit Protective Devices: Curve B Breakers ≤ 125 A Curve C Breakers ≤ 125 A gL Type Fuses ≤ 160 A gG Type Fuses ≤ 160 A