MOXA EDS-P206A-4PoE Industrial DIN Rail Ethernet Switch 4 Port POE+

MOXA EDS-P206A-4PoE Industrial DIN Rail Ethernet Switch 4 Port POE+ Features and Benefits • IEEE 802.3af/at compliant PoE and Ethernet combo ports • Up to 30 W output per PoE port • 12/24/48 VDC redundant power inputs • Intelligent power consumption detection and classification • Redundant dual VDC power inputs • -10 to 60°C operating temperature range Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3af/at-compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. Standards and Certifications EMI CISPR 32, FCC Part 15B Class A EMC EN 55032/24 EMS IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF Safety UL 508 MTBF Time 1,398,743 hrs Standards Telcordia (Bellcore), GB Package Contents Device 1 x EDS-P206A Series switch Installation Kit 4 x cap, plastic, for RJ45 port Documentation 1 x quick installation guide 1 x warranty card Warranty 3 Years