IP Protection level tester Standard touch test tool IP1X/IP2X/IP3X/IP4X test probe

S & K membeli produk ini WAJIB SETUJU dan MEMBACA sampai tuntas :
. Produk dikirimkan dari China bukan dari Indonesia.
. Estimasi pengiriman 14-65 hari.

IP1X |IP2X |IP3X test probe test probe test probe test probe |IP4X

IP1 |IEC61032 1|Test probe with the test probe A


Basic profile:
According to the GB/T4208-2008, IEC61032:1997, IEC60529:2001 and UL and other relevant provisions made.

Technical parameter:
1, the ball diameter: 50mm
2, baffle diameter: 50mm
3, baffle thickness: 4mm
4, handle diameter: 10mm
5, handle length: 100mm
6, according to IEC61032 Figure 1 (probe A Test), GB/T4208-2008 table 6 (the first feature number 1).





IP2 |IEC61032 2|Test probe B probe test chart


Product overview:
In accordance with GB2099, GB4706, GB4943, GB4208IPX2, GB3883 Figure 1, IEC61032 Figure 2 test with B, IEC950, 2A, IEC60884, IEC60335, GB/T16842, test with B, UL507, EN60529 Figure 1, UL1278 figure 8.4 and other standard requirements. Protection test for preventing finger touch or electric shock test.

Basic profile:
According to the GB4706.1-2005, GB2099.1-2008 and related IEC61032, UL and other relevant provisions of the production.

Technical parameter:
1, bending refers to diameter: 12 mm
2, the length of the bending refers to: 80mm (total length of section three)
3, baffle diameter: 50mm
4, handle length: 100mm
5, reference standard: GB4706.1-2005 article IEC61032:1997, 8.1.1 Figure 2




IP3X test probe 3|Test figure probe C |IEC61032
Basic profile:
According to the GB/T4208-2008, IEC61032:1997, IEC60529:2001 and UL and other relevant provisions made.

Technical parameter:
1, probe length: 100mm
2, probe diameter: 2.5mm
3, ball diameter: 35mm
4, handle diameter: 10mm
5, handle length: 100mm
6, according to IEC61032 Figure 3 (probe C Test), GB/T4208-2008 table 6 (the first feature number 3).
7, to prevent the test requirements for access to hazardous parts, C type test probe with 3 + 0.3N, the link is not thrust probe.
Note: do not take the thrust of the product, please use the push pull meter.
8, because the test probe is precision machinery products, please use gently, safekeeping.
At the top of the test probe may rust, pay attention to maintenance door.





IP4X test probe 3|Test figure probe D |IEC61032

Basic profile:
According to the GB/T4208-2008, IEC61032:1997, IEC60529:2001 and UL and other relevant provisions made.

Technical parameter:
1, probe length: 100mm
2, probe diameter: 1mm
3, ball diameter: 35mm
4, handle diameter: 10mm
5, handle length: 100mm
6, according to IEC61032 Figure 4 (probe D Test), GB/T4208-2008 table 6 (the first feature digital 4/5/6).
7, to prevent the test requirements for access to hazardous parts, D type test probe with 1 + 0.1N, the link is not thrust probe.
Note: do not take the thrust of the product, please use the push pull meter.
8, because the test probe is precision machinery products, please use gently, safekeeping.