(Arduino) STM32F103C8T6 Arm STM32 STM 32 Minimum system minsys module

Informasi produk: Board ini menggunakan STM32F103C8T6 sebagai core nya. 1. MCU dengan 8M crystal dan rangkaian power supply USB 2. I/O port terletak di kiri dan kanan board ini. 3. Menggunakan SWD simulation debug interface. 4. Menggunakan Micro USB port untuk komunikasi dan sumber tegangan. 5. RTC crystal merk Epson lebih stabil. Chip STM32F103C8T6: Package Type: LQFP; Jumlah pin: 48; Kernel: Cortex-M3; Operating frequency: 72MHz; Storage resources: 64K Byte Flash, 20KByte SRAM; Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports, Analog-to-digital conversion: 2x ADC (12-bit / 16-channel) Timers: 3 general timers and 1 advanced timer Debug Download: Support JTAG / SWD debug interface to download, support for IAP Chip RT9193: 3.3V regulator chip, the maximum output of 300mA. Interface description: 1, SWD interface: support for simulation, download and debug. 2, Mirco USB interface: power supply and USB communication, does not support the download. 3, USART1 interface: USART1 can be used to download the program, or use the USART1 for communication. 4, MCU pin interface: leads all I / O port pins, easy to connect with peripherals. 5, 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatment Other Device Description: 1, Power LED (PWR): Power indicator status, can determine whether the power supply is stable. 2, the user LED (PC13): to facilitate the I / O output test or indicate the program running. 3, start jumping choose programming mode: (1, the user flash memory 2, SRAM 3, system memory). 4, reset button: reset chip for the user program. 5, 8M Crystal: The frequency can be set to make the system clocked at 72MHz. 6,32.768KHz Crystal: Available for built-in RTC, or for calibration. Sebagian penjelasan tidak diterjemahkan karena lebih mudah dimengerti dalam bahasa Inggris. Selamat mencoba