Elcometer 122 Testex Tape X Coarse

Elcometer 122 Testex Tape X Coarse, Coarse, Coarse Plus adalah media untuk mengukur ketebalan profile hasil sandblasting menggunakan juga bantuan alat elcometer 124 Dial Thickness Gauge
partnumber E 122 --- C1, Elcometer 122 X-Coarse 38 - 115"m (1.5 - 4.5mils)

The Elcometer 122 Testex" Replica Tape is designed to provide a permanent mould of the surface profile, which can then be measured using a thickness gauge.
Elcometer 122 Testex" Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile. The profile of the surface can then be measured using the Elcometer 124 Thickness Gauge.

Elcometer 122 Testex" Replica Tape is available in four profile ranges. It is important that the tape grade chosen is reflective of the profile being measured.

For surface profiles between 12 & 25'm (0.5 & 1.0mils): Coarse Minus Tape
For surface profiles between 20 & 38'm (0.8 & 1.5mils): Coarse Tape
For surface profiles between 38 & 64'm (1.5 & 2.5mils): Average of Coarse and X-Coarse Tape
For surface profiles between 64 & 115'm (2.5 & 4.5mils): X-Coarse Tape
For surface profiles greater than 115'm (4.5mils): X-Coarse Plus Tape
There are 50 tests in each Replica Tape roll.

harga tersebut merupakan harga per pcs
1 pcs isi 50 lembar

untuk pemesanan harap check stock terlebih dahulu