5.0/ 5.0
100% pembeli merasa puas
4 rating • 2 ulasan
5(4)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 5
Subtotal
Rp13.690.000
Elcometer 138 E138-1C Bresle Salt Kit (Contains E135----C25)
Rp13.690.000
Jual Elcometer E138-1C Bresle Salt Kit
Part Number : E138-1C
Elcometer 138 Bresle Salt Kit
It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved.
If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs.
The Elcometer 138 Bresle Kits include the Elcometer 138 Bresle Salt Meter. This lightweight, portable meter measures the conductivity of the test sample using a single drop, then automatically converts this to show the density of salts, negating the need for the user to do a manual calculation when working in accordance with ISO 8502-6 or ISO 8502-9.
The Elcometer 138B Basic Bresle Kit includes the Elcometer 138E Conductivity Meter. Incorporating a cup-style sensor, the Elcometer 138 Conductivity Meter can measure the conductivity of a solution from a few drops of a sample.
Elcometer 138 Bresle Salt Kit with Elcometer 135C Bresle Test Patches- E138-1C
Kit Content:
Elcometer 135C Bresle Test Patch
Elcometer 138 Bresle Salt Meter & Sensor
Standard Calibration Solution
Moistening Solution
Bottle of Pure Water
Syringes & Needles
Plastic Beaker
CR2032 Lithium Batteries, Transit Case & User Guide
Key features of the Elcometer 135C Bresle Test Patch include:
Easy to peel off after test, leaving no foam on the substrate
19% thicker foam walls than traditional patches - easier to insert a needle
Sealed compartment with clear flexible membrane for sampling soluble impurities
Covers on both sides to protect against dust and contaminants
Supplied with a Certificate of Cleanliness & Test Area
Available in boxes of 25 & 100
untuk stock silahkan chat melalui fitur chat atau ke :
Part Number : E138-1C
Elcometer 138 Bresle Salt Kit
It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved.
If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs.
The Elcometer 138 Bresle Kits include the Elcometer 138 Bresle Salt Meter. This lightweight, portable meter measures the conductivity of the test sample using a single drop, then automatically converts this to show the density of salts, negating the need for the user to do a manual calculation when working in accordance with ISO 8502-6 or ISO 8502-9.
The Elcometer 138B Basic Bresle Kit includes the Elcometer 138E Conductivity Meter. Incorporating a cup-style sensor, the Elcometer 138 Conductivity Meter can measure the conductivity of a solution from a few drops of a sample.
Elcometer 138 Bresle Salt Kit with Elcometer 135C Bresle Test Patches- E138-1C
Kit Content:
Elcometer 135C Bresle Test Patch
Elcometer 138 Bresle Salt Meter & Sensor
Standard Calibration Solution
Moistening Solution
Bottle of Pure Water
Syringes & Needles
Plastic Beaker
CR2032 Lithium Batteries, Transit Case & User Guide
Key features of the Elcometer 135C Bresle Test Patch include:
Easy to peel off after test, leaving no foam on the substrate
19% thicker foam walls than traditional patches - easier to insert a needle
Sealed compartment with clear flexible membrane for sampling soluble impurities
Covers on both sides to protect against dust and contaminants
Supplied with a Certificate of Cleanliness & Test Area
Available in boxes of 25 & 100
untuk stock silahkan chat melalui fitur chat atau ke :
Ada masalah dengan produk ini?