Elcometer 456 Non Ferrous Probe Scale 2 Straight T456CN2S 5000 micron

Jual Elcometer 456 Non Ferrous Probe Scale 2 Straight 0-5mm/0-500mils
Part Number : T456CN2S

Elcometer 456 Coating Thickness Gauge Probe Range
All Elcometer 456 coating thickness gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.
Ferrous coating thickness gauge probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 coating thickness ferrous gauges accept any ferrous probe.

Non-ferrous coating thickness gauge probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe.

Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF coating thickness gauges accept all ferrous, non-ferrous and dual FNF probes.

Standard Straight Probes
Standard probes measure coatings on both flat and curved surfaces.

Elcometer probes have a maximum operating temperature of 80°C (176°F) with the exception of separate ferrous probes 150°C (300°F) and Hi-Temperature PINIP’s 250°C (480°F). The stated temperature is the substrate temperature, and the duty cycle of the probe must be reduced to ensure a minimal temperature build-up within the probe.

All Elcometer coating thickness gauge probes are supplied with a Test Certificate and a set of calibration foils appropriate to the scale range of the probe.

Harap tanyakan stock terlebih dahulu kepada kami melalui fitur chat atau ke :