5.0/ 5.0
100% pembeli merasa puas
14 rating • 3 ulasan
5(14)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 5
harga sebelum diskonRp195.000
Subtotal
Rp189.150
ExpressLRS ELRS 2.4Ghz 5 Channel PWM Receiver
Rp189.150
diskon 3%
Harga sebelum diskon Rp195.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Radio TX RX
Specs :
Brand: BAYCK
Model: BK-2.4G-5CH
Frequency: 2.4Ghz
Chip: SX1281+ESP8285
Telemetry power: 12dbm
PCB board color: black
RF Connector:IPEX 1
Input voltage: 4-10V
PWM channel: 5 channels
Support one channel maximum 34V voltage return (requires firmware version 3.0.0 and above)
Receiver output protocol: PWM or CRSF
Power consumption: 45mA@5V (connection status), 85mA@5V (WIFI upgrade status)
Weight: 4.7g (receiver plus antenna)
PCB size: 15.5mm*25.5mm
Firmware: BAYCKRC 2.4Ghz 5xPWM RX
PWM output settings
The ELRS PWM receiver can enter the configuration interface through WIFI, and set parameters such as PWM channel, refresh frequency, and runaway protection. Specific steps are as follows:
The receiver is powered on and waits for 60S, the receiver light flashes quickly, connect to the WIFI hotspot (ExpressLRS RX) password expresslrs, and automatically enter the setting interface.
ELRS official website introduction https://www.expresslrs.org/3.0/hardware/pwm-receivers/
TO Update firmware for this receiver, go to : https://elrs.bayckrc.com/
Package Included:
1x BAYCK ELRS 2.4G 5CH PWM Receiver
1x 2.0dbi 2.4g copper pipe to antenna
Brand: BAYCK
Model: BK-2.4G-5CH
Frequency: 2.4Ghz
Chip: SX1281+ESP8285
Telemetry power: 12dbm
PCB board color: black
RF Connector:IPEX 1
Input voltage: 4-10V
PWM channel: 5 channels
Support one channel maximum 34V voltage return (requires firmware version 3.0.0 and above)
Receiver output protocol: PWM or CRSF
Power consumption: 45mA@5V (connection status), 85mA@5V (WIFI upgrade status)
Weight: 4.7g (receiver plus antenna)
PCB size: 15.5mm*25.5mm
Firmware: BAYCKRC 2.4Ghz 5xPWM RX
PWM output settings
The ELRS PWM receiver can enter the configuration interface through WIFI, and set parameters such as PWM channel, refresh frequency, and runaway protection. Specific steps are as follows:
The receiver is powered on and waits for 60S, the receiver light flashes quickly, connect to the WIFI hotspot (ExpressLRS RX) password expresslrs, and automatically enter the setting interface.
ELRS official website introduction https://www.expresslrs.org/3.0/hardware/pwm-receivers/
TO Update firmware for this receiver, go to : https://elrs.bayckrc.com/
Package Included:
1x BAYCK ELRS 2.4G 5CH PWM Receiver
1x 2.0dbi 2.4g copper pipe to antenna
Ada masalah dengan produk ini?