5.0/ 5.0
100% pembeli merasa puas
8 rating • 0 ulasan
5(8)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Sisa 9
Subtotal
Rp76.000
Isolasi 3M Scotch 35 Vinyl Electrical Tape (Varian Warna) - Merah
Rp76.000
Pilih warna: Merah
3M Scotch 35 Isolasi Vinyl Electrical Tape 3/4inch x 66 ft
Harga Tercantum per 1 Roll
Original Product 3M Indonesia. Barang Resmi. BNIB.
Tersedia 5 Varian Warna (Biru, Merah, Kuning, Putih, Hijau)
HATI-HATI !! BANYAK BEREDAR BARANG IMPORT NON RESMI. TIDAK TERJAMIN KEASLIAN DAN STANDAR KEBERSIHAN. PRODUK KAMI DIJAMIN 100% RESMI GARANSI 3M INDONESIA.
3M Scotch Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) colorcoding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas.
Scotch Tape 35 operates over a wide range of temperatures up to 221F (105C); applies smoothly and conforms well above 32F (0C).
Applications
Color coding for phase identification, job identification and safety
Insulating electrical wiring
Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather
Installation
Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.
On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.
Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.
Harga Tercantum per 1 Roll
Original Product 3M Indonesia. Barang Resmi. BNIB.
Tersedia 5 Varian Warna (Biru, Merah, Kuning, Putih, Hijau)
HATI-HATI !! BANYAK BEREDAR BARANG IMPORT NON RESMI. TIDAK TERJAMIN KEASLIAN DAN STANDAR KEBERSIHAN. PRODUK KAMI DIJAMIN 100% RESMI GARANSI 3M INDONESIA.
3M Scotch Vinyl Electrical Tape 35 is a 7 mil (0,178 mm) polyvinyl chloride (PVC) colorcoding tape. Outstanding electrical and mechanical properties make this tape excellent for use in phase identification, color coding of motor leads and piping systems, and for marking safety areas.
Scotch Tape 35 operates over a wide range of temperatures up to 221F (105C); applies smoothly and conforms well above 32F (0C).
Applications
Color coding for phase identification, job identification and safety
Insulating electrical wiring
Protecting electrical conductors, motor leads and piping from moisture, alkalis, acids, corrosion, abrasion and weather
Installation
Apply in half-lapped layers with sufficient tension to conform and produce a uniform covering. In most applications, this tension will reduce the tape width to approximately 60% of its original width.
On a pigtail splice, wrap the tape beyond the end of the wire and then fold back and over-wrap, leaving a protective cushion to resist cut-through.
Wrap uphill, taping from a smaller diameter to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan