Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp15.000.000
220V Intput Voltage Withstand Hi-Pot Tester-2670AM for Testing 5KV
Rp15.000.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Rk2670AM Withstand Hi-Pot 5KV 100VA Tester
RK267 series voltage withstand test instruments are for general- purpose HV test operation. It can be widely used for voltage withstand test in electrician’s assistant instrument,rubber-wooden facility,voltage convertor,wires , power meter, motor, power supply plug, cables and all kinds of electronic and electric products. As the launch of the national security standard, Voltage withstand instrument has become one of necessary withstand test instruments to the radio and electronic products manufacturer.
Operating request: Environmental temperature 0~40℃
Relative dumidity≤75%
Pre-used Caution
Read the following items carefully before operating RK267 series
voltage withstand test instrument
1. Use three-hole power supply plug and insure GND connection
well.
2. GND port and power supply GND port should be connected
well
3. Wear insulation glove, stand on insulation mat
4. Anti-clockwisely circumvolve “V-ADJ” rotary switch to the
maximum before turn on test instrument.
5. Before preset all functions, reset instrument
6. Don’t connect test port and test wire when doing test
7. Don’t connect HV output port with shield box or GND wire to
avoid instrument damage.
8. Turn off power when accident take place
9. Examine and repair when Indicator or annunciator is out of
function
10. Operate carefully to avoid hazard when take the remote test.
11.The instrument must be placed on the worktable of conductive materials
12.The operator can not wear clothes with metal decoration or wear metal accessories
13.When the tester is in the test conditions, the test line, the test probes, output end , and the test objects are all with high pressure, do not touch!
Item Included(142006)
1×Withstand voltage test equipment
1×High voltage test bar
1×Remote control test bar
1×Ground wire
1×power cord
thanks
RK267 series voltage withstand test instruments are for general- purpose HV test operation. It can be widely used for voltage withstand test in electrician’s assistant instrument,rubber-wooden facility,voltage convertor,wires , power meter, motor, power supply plug, cables and all kinds of electronic and electric products. As the launch of the national security standard, Voltage withstand instrument has become one of necessary withstand test instruments to the radio and electronic products manufacturer.
Operating request: Environmental temperature 0~40℃
Relative dumidity≤75%
Pre-used Caution
Read the following items carefully before operating RK267 series
voltage withstand test instrument
1. Use three-hole power supply plug and insure GND connection
well.
2. GND port and power supply GND port should be connected
well
3. Wear insulation glove, stand on insulation mat
4. Anti-clockwisely circumvolve “V-ADJ” rotary switch to the
maximum before turn on test instrument.
5. Before preset all functions, reset instrument
6. Don’t connect test port and test wire when doing test
7. Don’t connect HV output port with shield box or GND wire to
avoid instrument damage.
8. Turn off power when accident take place
9. Examine and repair when Indicator or annunciator is out of
function
10. Operate carefully to avoid hazard when take the remote test.
11.The instrument must be placed on the worktable of conductive materials
12.The operator can not wear clothes with metal decoration or wear metal accessories
13.When the tester is in the test conditions, the test line, the test probes, output end , and the test objects are all with high pressure, do not touch!
Item Included(142006)
1×Withstand voltage test equipment
1×High voltage test bar
1×Remote control test bar
1×Ground wire
1×power cord
thanks
Ada masalah dengan produk ini?
ULASAN PEMBELI

Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan