Pool PH ORP Controller Parameters clearspring Model 250

swimming pool ph orp controller included dispensing chlorine chemical dosing system for water quality with automatic dosing pump

The ORP/PH digital controller automaticallly maintainsboth sanitizer ORP(oxidation-reduction potentail or redox) and water Ph in pools and spas .All operating functions are clearly labeled and accessible from the front panel,with safety and easy -reset features not found on ther controllers.The default PH control level is 7.0.Below 6.9,the water is too acidic and causes corrosion and eye irritation.Above 7.5,it is too alkaline and causes are
irritation plus water cloudiness,scaling ,stains and reduced sanitizer efficiency.The default ORP controller level is 650mV,values for prevention of germs and bacteria. we can supply many model ,different choice.

>Advantages
1) The perfect match for your pool with its liquid crystal display.
2) Its ability to integrate all types of pool maintenance functions.
3) Our control is easily programmed for daily, monthly or seasonal requirements.
4) Its smart thermo-plastic housing is suitable for fresh or salt water
5) Can be installed away from your pool area. it's also has battery backup.
Ideal for: 1) Hotels 2) Motels 3) Clubs 4) Condos 5) Apartments 6) Homes

>Chacteristics
1.3 models to choose:15,25,50g/hr
2.Self cleaning reverse polarity
3.Quality titanium cells
4.Light transformer models
5.Maximum working pressure:250kpa/36psi/2.5bar

>Pool PH+ORP Controller Parameters
OPR Control Adjustable from 0 to 999mv
ph Control Adjustable from 1.0 to 14
ORP Sensor Platinum electrode with 13-ft(4m) cable
ph Sensor Glass electrode with 13-ft(4m) cable
Readouts ORP(3 digits) and ph(2 digits) LEDs
Feed modes Manual, automatic
Adjustments Setpoint, calibration, limits, feed rate
Indicators LEDs for feed mode, feed status, alarms
Safety Audio,visual and remote alarms
out-of rang limits and overfeed safety timers
Cabinet Polystyrene 9x7x4in. (22x18x10cm)
Electrical AC 220V/50hz
Plumbing PVC