4.9/ 5.0
96% pembeli merasa puas
25 rating • 5 ulasan
5(24)96%
4(0)0%
3(1)4%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 133
Subtotal
Rp260.000
ST-Link V2 STM32 STM8 Programmer In-circuit Debugger
Rp260.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
STM8 applications use the USB full speed interface to communicate with STMicroelectronic \'s ST Visual Develop (STVD) or ST Visual Program (STVP) software.
STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.
Features
5 V power supplied by USB connector
USB 2.0 full speed interface compatible
USB standard A to Mini-B cable provided
SWIM specific features:
* 1.65 V to 5.5 V application voltage supported on SWIM interface
* SWIM low-speed and high-speed modes supported
* SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
* SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector
* SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
JTAG/SWD specific features:
* 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs
* JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
Direct firmware update feature supported
Status LED which blinks during communication with PC
Operating temperature 0 to 50 C
STM8 applications use the USB full speed interface to communicate with STMicroelectronic \'s ST Visual Develop (STVD) or ST Visual Program (STVP) software.
STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments.
Features
5 V power supplied by USB connector
USB 2.0 full speed interface compatible
USB standard A to Mini-B cable provided
SWIM specific features:
* 1.65 V to 5.5 V application voltage supported on SWIM interface
* SWIM low-speed and high-speed modes supported
* SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
* SWIM cable for connection to the application via an ERNI standard vertical (ref: 284697 or 214017) or horizontal (ref: 214012) connector
* SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
JTAG/SWD specific features:
* 1.65 V to 3.6 V application voltage supported on the JTAG interface and 5 V tolerant inputs
* JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
Direct firmware update feature supported
Status LED which blinks during communication with PC
Operating temperature 0 to 50 C
Ada masalah dengan produk ini?