5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 100000
Subtotal
Rp700.000
Analog pH Meter Kit DFRobot
Rp700.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: sensor
PERINGATAN : Sehubugan dengan pelarangan cairan masuk bagasi pesawat dan pelarangan paket berisi cairan oleh agen pengiriman, maka komponen cairan pada sensor ini di kristalkan oleh developer, silahkan mengisi ulang dengan KCL3N solution atau larutkan dengan air suling, bagian yang mengkristal adalah KCL
INTRODUCTION
Need to measure water quality and other parameters but haven't got any low cost pH meter? Find it difficult to use with Arduino? Our analog pH meter, specially designed for Arduino controllers and has convenient and practical connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at 0.1pH (25 ). For most hobbyist this great accuracy range and it's low cost makes this a great tool for biorobotics and other projects! It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. If pre-programmed, you will get the pH value easily. Comes in compact plastic box with foams for better mobile storage.
APPLICATIONS
Water quality testing
Aquaculture
SPECIFICATION
Module Power : 5.00V
Module Size : 43 x 32mm
Measuring Range :0 - 14PH
Measuring Temperature: 0 - 60
Accuracy : 0.1pH (25 )
Response Time : 1min
pH Sensor with BNC Connector
pH2.0 Interface ( 3 foot patch )
Gain Adjustment Potentiometer
Power Indicator LED
DOCUMENTS
Wiki Doc dfrobot*com/wiki/index.php/PH_meter(SKU:_SEN0161)
PH composite electrode manual dfrobot*com/image/data/SEN0161/PH%20composite%20electrode%20manual.pdf
Arduino sample code dfrobot*com/image/data/SEN0161/phMeterSample.zip
SHIPPING LIST
pH probe (BNC connector) x1
pH sensor circuit board x1
Analog cable x1
INTRODUCTION
Need to measure water quality and other parameters but haven't got any low cost pH meter? Find it difficult to use with Arduino? Our analog pH meter, specially designed for Arduino controllers and has convenient and practical connector and a bunch of features. Instant connection to your probe an your Arduino to get pH measurements at 0.1pH (25 ). For most hobbyist this great accuracy range and it's low cost makes this a great tool for biorobotics and other projects! It has an LED which works as the Power Indicator, a BNC connector and PH2.0 sensor interface. To use it, just connect the pH sensor with BND connector, and plug the PH2.0 interface into the analog input port of any Arduino controller. If pre-programmed, you will get the pH value easily. Comes in compact plastic box with foams for better mobile storage.
APPLICATIONS
Water quality testing
Aquaculture
SPECIFICATION
Module Power : 5.00V
Module Size : 43 x 32mm
Measuring Range :0 - 14PH
Measuring Temperature: 0 - 60
Accuracy : 0.1pH (25 )
Response Time : 1min
pH Sensor with BNC Connector
pH2.0 Interface ( 3 foot patch )
Gain Adjustment Potentiometer
Power Indicator LED
DOCUMENTS
Wiki Doc dfrobot*com/wiki/index.php/PH_meter(SKU:_SEN0161)
PH composite electrode manual dfrobot*com/image/data/SEN0161/PH%20composite%20electrode%20manual.pdf
Arduino sample code dfrobot*com/image/data/SEN0161/phMeterSample.zip
SHIPPING LIST
pH probe (BNC connector) x1
pH sensor circuit board x1
Analog cable x1
Ada masalah dengan produk ini?