Printer Epson LQ-780 LQ 780 Dot Matrix - Pengganti Epson LQ 680 Pro

Epson LQ-780 Dot Matrix Printer Baru amp; Garansi Resmi 1 Tahun Epson Indonesia Feature : Narrow Carriage Speed: up to 487cps (10cpi) Prints up to 6-part forms Platen gap functions 1 original + 6 copies Print Method: Impact dot matrix Control Panel: 4 Buttons and 6 LEDs Print Direction: Bi-directional with logic seeking Number of Pins in Head: 24 pins Control Code: ESC/P2, IBM-PPDS Reliability: MVBF: 40 million lines (except print head) MTBF: 20,000 Hrs POH (25% Duty) Printhead Life: 400 million strokes/wire Paper Path: Manual Insertion: Front in, Front out Push Tractor: Rear in, Front out Supported OS: Microsoft Windows XP / Vista / 7 / 8 / 8.1 / 10 / 11 Utility: Epson Status Monitor 3: Microsoft WIndows XP / Vista / 7 / 8 / 10 / 11 Epson Setting Utility: Microsoft Windows XP / Vista / 7 / 8 / 10 / 11 Interface: Standard: Bi-directional Parallel (IEEE 1284 Nibble mode support), USB 2.0 (Full Speed Mode) Paper Media: Cut Sheet (Single Sheet): Width: 90 - 304.8 mm | 3.5 - 12” Length: 70 - 420 mm | 2.8 - 16.5 #34; Thickness: 0.065 - 0.19 mm | 0.0025 - 0.0074 #34; Cut Sheet (Multi-part Sheet): Width: 90 - 304.8 mm | 3.5 - 12” Length: 70 - 420 mm | 2.8 - 16.5 #34; Thickness: 0.12 - 0.49 mm | 0.0047 - 0.0019 #34; Envelope (No.6): Width: 165 mm | 6.5 #34; Length: 92mm | 3.6 #34; Thickness: 0.16 mm | 0.063 #34; Envelope (No.10): Width: 241 mm | 9.5 #34; Length: 105 mm | 4.1 #34; Thickness: 0.16 mm | 0.063 #34; Continuous Paper (Single Sheet): Width: 101.6 - 304.8 mm | 4 - 12 #34; Length: 76.2 - 558.8 mm | 3.0 - 22.0 #34; Thickness: 0.65 - 0.15 mm | 0.002 - 0.005 #34; Continuous Paper (Multi-part Forms): Width: 101.6 - 304.8 mm | 4 - 12 #34; Length: 76.2 - 558.8 mm | 3.0 - 22.0 #34; Thickness: 0.12 - 0.49 mm | 0.0047 - 0.019 #34; Card: Width: 90 - 200 mm | 3.54 - 7.8 #34; Length: 90 - 200 mm | 3.54 - 7.8 #34; Thickness: 0.22 mm | 0.087 #34; Roll Paper: Width: 213 - 219 mm | 8.83 - 8.62 #34; Thickness: 0.07 - 0.09 mm | 0.002 -0.005 #34; Line Spacing: 4.23mm (1/6”) or programmable in increments of 3.175mm (1/8”) or 0.0706mm (1/360”)