Paket Speaker Yamaha Aktif dbr 10 With Mg10xu yamaha original

Paket
2 Unit Yamaha DBR10
1 Unit Yamaha MG10XU
2 Unit Kabel XLR @ 6Meter
3 Unit kabel Power
3 Unit kartu Garansi


MG10XU
On-board processors : SPX algorithm: 24 programs
Phantom power: +48 V
Digital I/O: USB Audio Class 2.0 compliant, Max 192 kHz, 24-bit
Input Channels: 4 Mono[MIC/LINE], stereo[LINE]: 3
Output Channels: STEREO OUT: 2
MONITOR OUT: 1
PHONES: 1
AUX SEND: 1
Bus: Stereo: 1, AUX[FX]: 1
Input Channel Function
PAD: 26 dB (Mono)
HPF: 80 Hz, 12 dB/oct (Mono)
COMP: 1-knob compressor Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB, Attack time: approx. 25 msec, Release time: approx. 300 msec
EQ HIGH: Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ MID: Gain: +15 dB/-15 dB, Frequency: 2.5kHz peaking
EQ LOW: Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED: LED turns on when post EQ signal reaches 3 dB below clipping
Level Meter: 2 x 7 -segment LED meter [PEAK, +10, +6, 0, -6, -10, -20 dB]

DBR10
Power Configuration: Bi-amped
LF Driver Size: 1 x 10"
HF Driver Size: 1"
LF Driver Power Amp: 500W
HF Driver Power Amp: 200W
Total Power: 700W
Inputs: 2 x XLR/TRS Combo, 1 x Stereo
Outputs: 1 x XLR
Frequency Range: 55Hz-20kHz (-10dB)
Crossover Frequency: 2.1kHz
Maximum Peak SPL: 129dB
Horizontal Coverage Angle: 90 Degrees
Vertical Coverage Angle: 60 Degrees
Enclosure Material: Plastic
Mounting Options: Pole Mount with 1.37' socket, Floor Wedge, 2 x M8 Fly Points
Power Source: Standard IEC AC cable
Height: 19.4"
Width: 12.1"
Depth: 11.4"