5.0/ 5.0
100% pembeli merasa puas
7 rating • 0 ulasan
5(7)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp89.700
USB Logic Analyzer Analiser 24MHz 8 Ch MCU Arduino AVR ARM FPGA saleae
Rp89.700
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: TOOL Pengkabelan dan Pengukuran
Barang, merk, kode sesuai foto
24MHz 8-Channel USB LOGIC ANALYZER.
Software Download: http://bit.ly/2DWpF7W
Saleae logic analyzer is a small size, very handy USB supported logic analzyer. This product is affordable and very useful. You can turn your personal computer to a logic analyzer by this product.
It can be used in many medium level applications easily with sampling frequency which can be reached up to 24 MHz. 8 different channel can be controlled with 8 digital input pins. Easy and comfortable usage can be provided with 2 ground line. It can be used with lots of microcontrollers such as Arduino. Each developer must have this device, regardless of the size of the project. You can see 0's and 1's that are between two nodes with the logic analyzer easily.
It can be read and can be displayed all units such as serial ports (Rx/Tx pins), I2C port (A4 and A5 pins), SPI port (10th, 11th, 12th and 13th pins) on the Arduino.
Features:
- 8 Channels
- Supports different trigger types. (Rising, Falling, High and Low)
- The sampling frequency up to 24MHz
- Maximum Working Voltage: 5.25VDC
Supported Protocols:
-CAN
-DMX-512
-I2C
-I2S/PCM
-Manchester
-1-Wire
-Async Serial
-Simple Parallel
-SPI
-UNI/O
-It is fully compatible with Saleae Logic softwares
24MHz 8-Channel USB LOGIC ANALYZER.
Software Download: http://bit.ly/2DWpF7W
Saleae logic analyzer is a small size, very handy USB supported logic analzyer. This product is affordable and very useful. You can turn your personal computer to a logic analyzer by this product.
It can be used in many medium level applications easily with sampling frequency which can be reached up to 24 MHz. 8 different channel can be controlled with 8 digital input pins. Easy and comfortable usage can be provided with 2 ground line. It can be used with lots of microcontrollers such as Arduino. Each developer must have this device, regardless of the size of the project. You can see 0's and 1's that are between two nodes with the logic analyzer easily.
It can be read and can be displayed all units such as serial ports (Rx/Tx pins), I2C port (A4 and A5 pins), SPI port (10th, 11th, 12th and 13th pins) on the Arduino.
Features:
- 8 Channels
- Supports different trigger types. (Rising, Falling, High and Low)
- The sampling frequency up to 24MHz
- Maximum Working Voltage: 5.25VDC
Supported Protocols:
-CAN
-DMX-512
-I2C
-I2S/PCM
-Manchester
-1-Wire
-Async Serial
-Simple Parallel
-SPI
-UNI/O
-It is fully compatible with Saleae Logic softwares
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan