Atur jumlah dan catatan
Stok Total: 746
Subtotal
Rp118.526
AD9226 High Speed ADC Module Adapter Signal Acquisition Analog to Digital Conversion PCB 65M Sampling FPGA Development Board
Rp118.526
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Selamat Datang Di Toko Kami
Semua Barang PreOrder 15-30 Hari
Selamat Belanja
Brand Name : EC Buying
Model Number : AD9226 12 Bit
Origin : Mainland China
Type : Voltage Regulator
Application : Computer
Supply Voltage : 3.3V PCB Board
Dissipation Power : low
Operating Temperature : 12Bit AD Data Acquisition Module
is_customized : Yes
Condition : New
Package : Module
Hign-concerned Chemical : None
Smart Electronics Experiment : Switch And Sensor For Arduino STM32
Module interface:
The analog signal input interface uses SMA interface; the data interface uses 2.54 pitch female interface. The interface of the module is shown in the figure below.
(8) This module is designed with a jack GND, which is used to connect the multimeter ground pen to facilitate user testing.
(7) Digital signal interface: 214 double-row 2.54 pitch female seat, the direction is downward. Coupled with the power supply interface, the 216 double-row 2.54 pitch female seat is used, and the direction is downward.
(6) Analog signal input interface: SMA interface.
(5) Module power supply: +5V single power supply.
(4) Digital interface level: 3.3V.
(3) Analog signal bandwidth: -3dB bandwidth is 350MHz.
(2) Analog signal input amplitude: 5V (that is, 10Vpp input).
(2) Maximum adoption rate: 65MSPS.
(1) Module function: 12-bit high-speed ADC module with two independent channels.
The main features of the module are as follows:
Block diagram of the module: dual and independent
The voltage input range of the module is -5V~+5V, that is, the signal with a peak-to-peak value of 10Vpp can be input. The module uses attenuation and offset circuits to condition the input signal and convert it into a 1V~3V (that is, a peak-to-peak value of 2Vpp) signal into the AD9226. That is, when -5V is input, the voltage at the ADC input is 3V; when 0V is input, the voltage at the ADC input is 2V; when +5V is input, the voltage at the ADC input is 1V. The block diagram of the high-speed AD module is shown below.
Semua Barang PreOrder 15-30 Hari
Selamat Belanja
Brand Name : EC Buying
Model Number : AD9226 12 Bit
Origin : Mainland China
Type : Voltage Regulator
Application : Computer
Supply Voltage : 3.3V PCB Board
Dissipation Power : low
Operating Temperature : 12Bit AD Data Acquisition Module
is_customized : Yes
Condition : New
Package : Module
Hign-concerned Chemical : None
Smart Electronics Experiment : Switch And Sensor For Arduino STM32
Module interface:
The analog signal input interface uses SMA interface; the data interface uses 2.54 pitch female interface. The interface of the module is shown in the figure below.
(8) This module is designed with a jack GND, which is used to connect the multimeter ground pen to facilitate user testing.
(7) Digital signal interface: 214 double-row 2.54 pitch female seat, the direction is downward. Coupled with the power supply interface, the 216 double-row 2.54 pitch female seat is used, and the direction is downward.
(6) Analog signal input interface: SMA interface.
(5) Module power supply: +5V single power supply.
(4) Digital interface level: 3.3V.
(3) Analog signal bandwidth: -3dB bandwidth is 350MHz.
(2) Analog signal input amplitude: 5V (that is, 10Vpp input).
(2) Maximum adoption rate: 65MSPS.
(1) Module function: 12-bit high-speed ADC module with two independent channels.
The main features of the module are as follows:
Block diagram of the module: dual and independent
The voltage input range of the module is -5V~+5V, that is, the signal with a peak-to-peak value of 10Vpp can be input. The module uses attenuation and offset circuits to condition the input signal and convert it into a 1V~3V (that is, a peak-to-peak value of 2Vpp) signal into the AD9226. That is, when -5V is input, the voltage at the ADC input is 3V; when 0V is input, the voltage at the ADC input is 2V; when +5V is input, the voltage at the ADC input is 1V. The block diagram of the high-speed AD module is shown below.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan