5.0/ 5.0
100% pembeli merasa puas
5 rating • 2 ulasan
5(5)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 99998
Subtotal
Rp78.000
Copy Cloning Auto Duplicator Universal Remote 433MHZ
Rp78.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Electrical
Copy Cloning Auto Duplicator Universal Remote 433MHZ
433MHZ Copy Universal Remote Controller Metal Clone Remotes Auto Copy Duplicator For Gadgets Car Home Garage
How to program:
Step-1 Clear the history code from duplicator
1. Press button A and B after until LED flash 3 times
2. Release button B (Keep pressing button A), and press button B Slowly for 3 times, LED flash
3. Release button A, finish code clearance.
If code clearance done properly, short press any button. Light won't flash at all.
If light flash when short press any button clearance process done wrong. Please repeat clearance process again.
Step-2 Copy code from original transmitter
Place the cloner remote and the original remote close together side by side. Make sure they are touching.
1. Simultaneously press a button on your original remote and one of the buttons on the clone remote and hold until the LED on the clone remote flashes steadily. The LED will first flash 3 times quick, then stops for a second, then flashes steadily.
2. Release both buttons. Programming is successful. Copy other buttons in same way.
Repeat all programing process again and use different remotes position face to face, side to side, back to back, like T Position. In most cases back to back cloning position is the best.
433MHZ Copy Universal Remote Controller Metal Clone Remotes Auto Copy Duplicator For Gadgets Car Home Garage
How to program:
Step-1 Clear the history code from duplicator
1. Press button A and B after until LED flash 3 times
2. Release button B (Keep pressing button A), and press button B Slowly for 3 times, LED flash
3. Release button A, finish code clearance.
If code clearance done properly, short press any button. Light won't flash at all.
If light flash when short press any button clearance process done wrong. Please repeat clearance process again.
Step-2 Copy code from original transmitter
Place the cloner remote and the original remote close together side by side. Make sure they are touching.
1. Simultaneously press a button on your original remote and one of the buttons on the clone remote and hold until the LED on the clone remote flashes steadily. The LED will first flash 3 times quick, then stops for a second, then flashes steadily.
2. Release both buttons. Programming is successful. Copy other buttons in same way.
Repeat all programing process again and use different remotes position face to face, side to side, back to back, like T Position. In most cases back to back cloning position is the best.
Ada masalah dengan produk ini?