JIKONG Jk Bms Active Balance Bms 60A 80A 100A 150A 200A 600A Smart Bms 8S 12S 13S 14S 16S 17S 20S 24S Lifepo4 Li-Ion Lto Battery

Use Manual
1. Download app and manual
2. Hardware connection
3. Startup
4. Open the app and connect the device
5. Set the number of strings and battery type
6. Check the battery status
Download link-IOS: Search (JIKONG BMS) in the APP STORE
Download link-Andriod : Search (JK BMS) in the Google STORE
Instructions: https://github.com/JIKBMS/files/tree/main
BMS protocol: https://github.com/syssi/esphome-jk-bms
(1) Connect the protection board and battery pack according to the
following wiring diagram,Make sure that the last power cord is also
Connected to the main positive pole,The total voltage of the battery
pack must be greater than 20V(Default BMS)/10V(4S BMS) before
tarting up.
(2) Use the display activation button or additional switch to activate the
BMS.
(3) Turn on GPS and Bluetooth on your mobile phone.
(4) Make sure your mobile Bluetooth is turned on, then turn on APP
click on the top left corner of APP to search for devices, and click on
the device name to connect to the default password: 1234.
(5) Parameters need to be set for the first start-up Setting requires a
password, The default parameter is set to password 123456,Simply
set the number of units and battery type.
(6) Once the parameters are set, go back to the real-time status page,
check the battery status, no error message is prompted and normal
operation,blue is the highest voltage, red is the lowest voltage.
Interface Function Description:
1. Temperature sensor interface: All models of JKBMS are equipped with
2. RS485 interface: All models of JK BMS are configured with
3. LCD interface: All models of JK BMS are equipped with
4. CAN interface: Only configurations with"CAN"in the model
5. Heating interface: Only configured with"Heat" in the model
Heating function description:
1. The heating function is achieved by detect the battery temperature,combined with low
temperature protection during charging,the status of the charger to achieve electricity Pool heating control function.
2. Not all BMSs