Download Tokopedia App
Tentang TokopediaMulai Berjualan PromoTokopedia Care
tokopedia-logo
Atur jumlah dan catatan

Stok Total: Sisa 10

Subtotal

Rp4.765.000

ENDA ECH7700-LV (ECH7700-SM - EC762) ECH SERİES UP/DOWN COUNTER RPM/TACHOMETER 72*72mm POWER SUPLEY :10-30V DC/8-24V AC

Rp4.765.000
  • Kondisi: Baru
  • Min. Pemesanan: 1 Buah
  • Etalase: Semua Etalase
FOR OTHER POWER supply options AND ENDA PRODUCTS, PLEASE WRITE US a Message


ECH7700-LUV ECH7700-SM

Supply      10-30V DC / 8-24V AC




Supply Voltage :
UV....90-250V AC
LV......10-30V DC / 8-24V AC





2x6 digit indicator


Programmable as Counter and RPM/Tachometer


6 digits Batch Counter


9 digits Total Counter


Period time differences, pulse time, turnover and speed
measurement


Easy to use front panel keypad


Counts Up or Down acording to input phase difference.


Input frequency can be selected.


Input signal can be calibrated to the desired value by
multiplying between 0.000001 and 99.9999


Decimal point can be set between 1 and 5


Sensor input type can be selected by using keypad (PNP, NPN)


Dual setpoint and dual contact relay


Output contact relay can be adjusted to continuous output or
between 0.01 and 999.9s intervals


Output delay time can be adjusted in Tachometer Mode


Functional reset option


0-500000 Offset option


Parameter access protection


RS485 Modbus communication interface


CE marked according to European Norms



Environmental Conditions


Ambient/Storage Temperature 0...50 ºC / -25...70 ºC
Relative Humidity80%
Relative humidity for temperatures up to 31 °C, decreasing linearly to 50% at
40 °C
Protection DegreeAccording
to EN 60529 Front panel: IP65, Rear panel: IP20
HeightMax. 2000m
Electrical Characteristics
Power Consumption5VA
External ConnectionsPlug-in
terminals
Inputs
Count Inputs CPA, CPB2
Channels (Max. 50kHz, 5V to 30V pulses), can be selected as PNP or NPN input
Counting Frequency20Hz,
50Hz, 100Hz, 500Hz, 1000Hz, 5000Hz, 10kHz, 20khz, 30kHz and 40kHz
Reset InputPNP:
Positive Reset (Can be adjusted between 1 to 100ms for 5V to 30V pulses)
NPN: GND terminal can be reset by connecting to "RESET
IN" terminal
Output
Control Output OUT1250V
AC, 2A (for resistive load), NO+NC
Control Output OUT2250V
AC, 2A (for resistive load), NO
SSR1, SSR2 OutputOpen
collector output (S.S. OUT): Max. 30V DC, 50mA
Sensor (Auxiliary)

Ada masalah dengan produk ini?

ULASAN PEMBELI

Toped Illustration

Belum ada ulasan untuk produk ini

Beli produk ini dan jadilah yang pertama memberikan ulasan