EnGenius Access Point (iD) EAP300 | 800 MW N-300 + Antenna 5 Dbi,WDS, & Repeater

EAP300 offers a "smoke detector" look, and is a high-powered (up to 29dBm) wireless-n access point / WDS Bridge / WDS AP / Repeater operates seamlessly in the 2.4GHz frequency spectrum supporting 802.11 b/g/n standard high speed feature.
It is the best way to add long range wireless capability to your existing wired network or to add bandwidth to your wireless installation

Specification :
MCU/RF : RTL8196C + RTL8192CE
Memory : 32MB
Flash : 4MB

Physical Interface :
~LAN : 1 x 10/100 Fast Ethernet RJ-45
~Reset Button
~Power Jack
~LEDs Status
~Power/Status
~LAN (10/100Mpbs)
~WLAN (Wireless connection)

Power Requirement :
Power Supply : 90 to 240 VDC +- 10%, 50/60 Hz
Active Ethernet (Power over Ethernet, IEEE802.3af) : 48 VDC/0.375A
Device : 12V/1A

Wireless Standard : IEEE802.11 b/g/n
Frequency : 2.400 ~ 2.484GHz (b/g/n)
Modulation Technologies :
>OFDM : BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK
>Operating Channels : 11 channels
Antenna : Embedded omnidirectional antenna (Diversity support)
Antenna Gain = 5 dBi

Topology : Infrastructure/Ad-Hoc
Operation Mode : Access Point/WDS Bridge/WDS AP/Repeater
Multiple BSSID : Supports up to 4 BSSIDs
LAN Settings :
IP (check validity and DHCP server IP range)
MAC
DHCP range, lease time, client list
VLANs : Supports 802.1q (up to 4 VLANs)
SSID to VLAN mapping
Spanning Tree : Supports 802.1d Spanning Tree Protocol
Wireless mode : 11b/11g/11n
Channel bandwidth (Auto, 20MHz, 40MHz)
Transmission rate : 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only
VPN : VPN pass-through (PPTP, L2TP, IPSEC)
QoS : WMM
WPS : Software only

Auto-channel Selection :
Automatically selecting least congested channel
Bandwidth Measurement:
IP range and bandwidth management
Backup & Restore : Save & restore settings through Web interface
Diagnosis : IP pinging statistics
Temperature Operating : 0 to 50o C
Dimensions :
Diameter : 120 mm
Height : 50 mm
Weight : 280 gr
Warranty : 1 Year