Speaker JBL PRX315D PRX 315D PRX-315D 15-inch portable two-way speaker system - SINGLE UNIT

READY STOCK
100% ORIGINAL
1 TAHUN GARANSI RESMI

Speaker JBL PRX315D PRX 315D PRX-315D 15-inch portable two-way speaker system

15" 2-Way Speaker System
PRX315D is a 15-inch portable two-way speaker system designed for live performance, music playback or reinforcement of speech.

For the low ends, PRX315D uses a premium 15-inch low frequency driver with a edge-wound ribbon voice coil of 2 ½ inch (64mm) in diameter to bring the system solid bass, high efficiency and large power handling capabilities. A JBL 2412 1-inch ferro-fluid cooled compression driver with titanium diaphragm provides the system with clean and warm high notes and uncompromised reliability. JBL SonicGuard technology improves system stability by protecting the high frequency driver from excessive power without interrupting the show. Apart from the drivers, fault-free performance of the system also relies on the precision-crafted crossover network, which feeds the two drivers with clear cut frequencies with minimum overlap and is capable of handling high power with its high-voltage capacitors and inductors. The patented Progressive Transition waveguide mounts on top of the tweeter and provides the system with superior coverage control, reduced distortion and smoother frequency response.

PRX315D encloses all the acoustic components in a rugged cabinet constructed from 15mm MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low frequency response. Two all-steel handles are integrated to sides of the case to make transport and setup easier. A 36-mm socket allows PRX315D to be mounted on a speaker pole and to work as a main or fill. The socket supports either up-straight standing or 10° tilting, helpful when the audience coverage needs to be uniformed. For the front of the speaker, a dent-resistant grille made from 18-gauge perforated steel protects the components inside from damage on the move or during the show.

Presently not available in Japan, Australia and New Zealand
Features
Premium 15-inch low frequency driver with a 2 ½ inch diameter edge-wound ribbon voice coil for solid and extended bass, high efficiency and power handling
JBL 2412 1-inch ferro-fluid cooled compression driver with titanium diaphragm delivers clean and warm high notes and uncompromised reliability
JBL SonicGuard technology constantly protects the high frequency driver from excessive power
Precision-crafted crossover feeds drivers with clear-cut frequencies and delivers coherent summation in the crossover region
Progressive Transition waveguide provides superior coverage control, reduced distortion and smoother frequency response
Rugged enclosure made from 15mm MDF (Medium Density Fiberboard)
36-mm dual angle pole-mounting socket
Dent-resistant grille protects the internal from damage on the move or during the show
For live performance, music playback or reinforcement of speech

Specifications
System Type 15” 2-way speaker
Frequency Range (-10dB) 38 Hz – 16 kHz
Frequency Response (±3 dB) 50 Hz – 12.5 kHz
Sensitivity 98 dB SPL
Nominal Impedance 8 Ω
Power Capacity 250 watts
Peak Power Capacity 1000 watts
Recommended Amplifier Power 250 - 500 watts @ 8Ω
Maximum SPL (1m) 128 dB
Nominal Dispersion 90° × 50°
Crossover Frequency 1.6 kHz
Dimensions (H x W x D) 681 mm × 455 mm × 422 mm(26.8 in × 17.9 in × 16.6 in)
Net Weight 23.9 kg (52.7 lbs)
Shipping Weight 29.1 kg (64.2 lbs)
HF Driver JBL 2412 1” exit compression driver mounted on Progressive TransitionTM Waveguide
LF Driver JBL M115-8A
Input Connector Parallel Neutrik Speakon NL-4 (×1)；1/4” TS phone jack (×1);
ENCLOSURE CONSTRUCTION 15 mm (0.6 in) MDF (Medium Density Fiberboard) with glued and mechanically fastened joint detail; black painting.
Grille 18-gauge, powder-coated steel
Mounting & Suspension 36 mm, dual-angle pole-mount socket; 12×M10 suspension points